Other Settings
10
67
En
Multi Channel Input Setup
You can adjust the level of the subwoofer for a multi-
channel input. Also, when the multi-channel input is
selected as an input source, you can display the video
images of other input sources. In the Multi Channel Input
Setup, you can assign a video input to the multi-channel
input.
1
Select ‘Multi Ch In Setup’ from the Other Setup
menu.
2
Select the ‘SW Input Gain’ setting you want.
•
0dB
– Outputs sound of the subwoofer at the level
originally recorded on the source.
•
+10dB
– Outputs sound of the subwoofer at the level
increased by 10 dB.
3
Select the ‘Video Input’ setting you want.
When the multi-channel input is selected as an input
source, you can display the video images of other input
sources. The video input can be selected from the
following:
DVD
,
BD
,
TV
,
DVR 1
,
DVR 2
,
VIDEO
.
4
When you’re finished, press RETURN.
You will return to the Other Setup menu.
ZONE Audio Setup
If you’ve made MULTI-ZONE connections (see
MULTI-
ZONE listening
on page 57) you may need to specify your
volume setting.
1
Select ‘ZONE Audio Setup’ from the Other Setup
menu.
2
Select the volume level setting.
1
•
Variable
– Use this setting if you’ve connected a
power amplifier in the sub room (this receiver is
simply being used as a pre-amp) and you will be
using this receiver’s controls to adjust the volume.
•
Fixed
– Use this setting if you’ve connected a fully
integrated amplifier (such as another Pioneer VSX
receiver) in the sub room and want to use that
receiver’s volume controls. (This setting is not
available if the surround back system setting is set to
ZONE 2
.)
With the
Fixed
setting, the source is sent from this
receiver at maximum volume, so make sure the volume is
quite low in the sub zone at first, and then experiment to
find the correct level.
3
When you’re finished, press RETURN.
You will return to the Other Setup menu.
7.Other Setup
:Return
a . Multi Ch In Setup
b . ZONE Audio Setup
c . SR+ Setup
d . HDMI Control Setup
e . OSD Adjustment
7a.Multi Ch In Setup
SW Input Gain
0dB
Video Input
[ BD ]
:Finish
7a.Multi Ch In Setup
SW Input Gain
[ 0dB ]
Video Input
BD
:Finish
Note
1 If you selected
ZONE 2
in the
Surround back speaker setting
on page 41, you won’t be able to change the volume level.
7.Other Setup
:Return
a . Multi Ch In Setup
b . ZONE Audio Setup
c . SR+ Setup
d . HDMI Control Setup
e . OSD Adjustment
7b.ZONE Audio Setup
ZONE 2 Volume Level
Variable
B e c a r e f u l o f l o u d
vo l u m e w h e n " F i xe d "
i s s e l e c t e d .
:Finish
VSX-1018AH_HY.book Page 67 Wednesday, February 27, 2008 9:08 PM
