Controls and displays
04
28
En
6
(TUNE/ST +/–) /ENTER
Use the arrow buttons when setting up your surround
sound system (see page 38). Also used to control DVD
menus/options and for deck 1 of a double cassette deck
player. Use the
TUNE +/–
buttons to find radio
frequencies and use
ST +/–
to find preset stations
(page 48).
7
TV CONTROL buttons
These buttons are dedicated to control the TV assigned to
the
TV CONT
button. Thus if you only have one TV to hook
up to this system assign it to the
TV CONT MULTI
CONTROL
button. If you have two TVs, assign the main
TV to the
TV CONT
button (see page 50 for more on this).
TV
Use to turn on/off the power of the TV.
TV VOL +/–
Use to adjust the volume on your TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
8
Component control buttons
The main buttons (
,
, etc.) are used to control a
component after you have selected it using the
MULTI
CONTROL
buttons.
The controls above these buttons can be accessed after
you have selected the corresponding
MULTI CONTROL
button (for example
DVD/LD
,
DVR/VCR
or
TV/SAT
(when connected to a DTV)).
DTV ON/OFF
Switches a digital TV on/off.
DTV INFO
Use to bring up information screens on a digital TV.
TUNER DISPLAY
Switches between named station presets and radio
frequencies (page 48).
MPX
Switches between stereo and mono reception of FM
broadcasts. If the signal is weak then switching to
mono will improve the sound quality (page 47).
AUDIO
Changes the audio language or channel on DVD
discs.
CH RETURN
Returns to the last channel selected with DTV, SAT
and some TVs.
SUBTITLE
Displays/changes the subtitles included in
multilingual DVD-Video discs.
CH +/–
Use to select channels when using a TV, VCR, DVR,
etc.
The following DVR controls can be accessed by pressing
SHIFT
:
REC
Starts recording.
REC STOP
Stops recording.
HDD/DVD
These buttons switch between the hard disk and DVD
controls for DVD/HDD recorders.
9
RECEIVER CONTROL buttons
THX
Press to select a Home THX listening mode
(page 31).
STANDARD
Press for Standard decoding and to switch between
the various Pro Logic IIx and Neo:6 options (page 30).
ADV. SURR
Use to switch between the various surround modes
(page 31).
STEREO
Switches between direct and stereo playback. Direct
playback bypasses the tone controls and any other
signal processing for the most accurate reproduction
of a source (page 32).
AUTO SURR
Press to have the receiver automatically detect what
kind of source you’re playing and select multichannel
or stereo playback as necessary (page 30).
ACOUSTIC EQ
Press to select an Acoustic Calibration EQ setting
(page 33).
SIGNAL SELECT
Use to select an input signal (page 33).
MIDNIGHT/LOUDNESS
Use Midnight when listening to movie soundtracks at
low volume. Use Loudness to boost the bass and
treble at low volume (page 36).
EFFECT/CH SEL
Press repeatedly to select a channel, then use –/+ to
adjust the level
(page 45). Also adjusts the level of the
Advanced Surround effects (page 31) as well as
Dolby Pro Logic IIx Music (page 32) and Neo:6 Music
parameters (page 32). You can then use the
+
and
–
buttons to make these adjustments.
VSX_1014.book.fm 28 ページ ２００４年５月１４日 金曜日 午前９時２４分
