Pioneer SVJ-DL01 Pro DJ, Software Manual

Page: 117 / 156

(Contd. on the next page)
DJS Ver. 1.600
117
10
Other Functions
Table of Functions
Contents Index
HEADPHONES Screen
EQ (Equalizer) Screen
EFFECT Screen
Hot CUE Button (A-H) The upper half operates player A while the lower half operates player B.
It works as follows during the play mode.
During Playback Mode (while the list hot cue memory button is not lit):
1. With list hot cue settings made and player paused silently
Calls out the registered list hot cue and pauses.
2. With the list hot cue settings made and the player playing
Calls out the registered list hot cue and starts playing.
During Recording Mode (while the list hot cue memory button is lit):
1. While a Loop is Playing
Records the loop that is playing.
2. Other than while a Loop is Playing
Saves that position as a cue point.
Record Button Toggles the List Hot Cue Recording Mode ON or OFF.
STEREO Button Toggles the stereo mode.
MONO SPLIT Button Toggles the mono split mode.
Mixing Adjustments Adjusts mixing (Master & non-master) of the master volume. If you right click, it
becomes positioned in the middle of its range.
MASTER Level Button Increases the volume of the Master monitor.
CUE Level Button Increases the volume of monitor other than master.
HI
Adjusts the output level in the high range. If you right click, it becomes positioned in
the middle of its range.
MID
Adjusts the output level in the mid range. If you right click, it becomes positioned in
the middle of its range.
LOW Adjusts the output level in the low range. If you right click, it becomes positioned in
the middle of its range.
+/- Buttons
*
Increases & decreases the output level of the selected range.
KILL Button
*
Cuts output of the selected range.
* The same button is for each range (HI, MID, LOW).
CHANNEL-A Button Applies the results of an effect to Channel A.
CHANNEL-B Button Applies the results of an effect to Channel B.
MASTER Button Applies the results of an effect to the master.
BPM Display Displays the BPM.
The Effects TAP Button Measures the BPM when applying an effect.
Display Effect Timer Displays the time of set up effects.
Effect Time Fine Tuning
Buttons
Makes the time setting of an effect longer or shorter.