manualshive.com logo in svg

Pioneer SH-D505, Operating Instructions Manual, Page: 13 / 56

Share
Download
Pioneer SH-D505 Operating Instructions Manual Download Page 13

13

SELECT

INFO

MENU

CH LIST

CH

CC

1

2

3

4

5

6

7

8

9

0

100

VIEW MODE

CH RETURN

ENT

CLEAR

VOL

∞

5

∞

5

2

3

·

ª

SELECTING THE CHANNELS

Press numeric and dot
buttons.

Ex. To select channel 56.02,
Press 

5

 

6

 

 

0

 

2

The channels can be selected using any of the following four methods.

Selecting a channel using the numeric buttons

MEMO
When channel filtering is setup,
some stations require that a
password be entered before
viewing the selected channel.
Enter the password when
indicated to do so, and then
select the desired channel.

W

atching

Digital TV

∞

After a channel is selected, a
short information banner
appears and is displayed for
10 seconds.

DTV

TV

FAVORITES

SELECT

INFO

MENU

CH LIST

CH

CC

1

2

3

4

5

6

VIEW MODE

CLEAR

VOL

CABLE

∞

5

∞

5

2

3

·

ª

STANDBY/ON

SELECT

INFO

MENU

CH LIST

CH

CC

1

2

3

4

5

6

7

8

9

0

100

VIEW MODE

CH RETURN

ENT

CLEAR

VOL

∞

5

∞

5

2

3

·

ª

Press CHANNEL UP/
DOWN buttons.

Selecting a channel using the CHANNEL UP/DOWN buttons

Ex. If channels 12.30, 25.01, 25.04 and 35.40 are
preset for the 

BLUE

 colored button, pressing

the button changes the channels as shown
below.

Selecting preset channels using the colored favorites buttons

Colored
buttons

MEMO

GREEN

 

RED

 

YELLOW

 can also

be used to select preset
channels.

MEMO
See pages 29-30 for favorite
channel presetting.

MEMO
• Some channels may appear

that are not currently broad-
casted.

• Channels removed from tuning

using the channel filter (page
33) cannot be selected.
This method requires Channel
Scan in advance.

After a channel is selected, a
short information banner
appears and is displayed for
10 seconds.

Ch 12.30      Ch 25.01      Ch 25.04      Ch 35.40

3

3

3

3

Selecting a channel using the on-screen display

P. 17, 18

When the numeric and dot
buttons are pressed, the
channel number appears and
is displayed for 3 seconds.
3-digit Main channels are
input for CATV reception.

MEMO
If the Sub-channel has been
entered incorrectly, a list of the
sub-channels available will be
automatically displayed, as long
as there are programs on the
Main Channel involved.

NOTE: When both Air and Cable are received, antenna input must be selected, by pushing

the 

AIR/CABLE

 button.

Summary of Contents for SH-D505

























































Reviews:

No comments