31
|
Supplementary Information, etc.
AV Adjust
You can quickly adjust settings you frequently use, such as
tone adjustments, etc.
Operation
:
You can make the settings on the TV screen while playing
something. Press on the remote controller to display
the AV Adjust menu. Note that there is no display on the TV
screen when the input selector is "CD", "TV", "PHONO",
"FM", or "AM", so follow the main unit
ʼ
s display while doing
the operations.
AV Adjust
Tone
Level
MCACC
Other
Bass
Treble
BD/DVD
Select the item with the cursor / buttons of the remote
controller and press ENTER to confirm your selection.
Use the cursors to change the settings.
•
To return to the previous screen, press .
•
To exit the settings, press .
■
Tone
Bass
:
Enhance or moderate the bass range of all channels
except the subwoofer channel.
Treble
:
Enhance or moderate the treble range of all channels
except the subwoofer channel.
•
It cannot be set if the listening mode is Direct or Pure
Direct.
■
Level
Center
:
Adjust the speaker level of the center speaker while
listening to some sound.
Subwoofer
:
Adjust the speaker level of the subwoofer while listening to
some sound.
•
The adjustment you made will be reset to the previous
status when you turn the unit to standby mode.
■
MCACC
MCACC EQ
:
Enable or disable the equalizer function that adjusts the
frequency balance over the entire speaker system.
•
This setting cannot be selected if Full Auto MCACC
setting has not been performed.
•
It cannot be set if the listening mode is Pure Direct.
Manual EQ Select
:
From the Home screen, select "Preset 1" to "Preset 3"
which were set in "MCACC" - "Manual MCACC" - "EQ
Adjust". The same sound field setting is applied all ranges
when set to "Off".
•
It cannot be set if the listening mode is Pure Direct.
Phase Control
:
Correct phase disturbance in the low range to enable
powerful bass reproduction that is faithful to the original
sound.
•
It cannot be set if the listening mode is Pure Direct.
Theater Filter
:
Adjust the soundtrack that was processed to enhance
its high pitch range, in order to make it suitable for home
theater.
•
It cannot be set if the listening mode is Direct or Pure
Direct.
■
Other
Sound Delay
:
If the video is behind the audio, you can delay the audio to
offset the gap. Different settings can be set for each input
selector.
•
It cannot be set if the listening mode is Pure Direct and
the input signal is analog.
Sound Retriever
:
Improve the quality of the compressed audio. Playback
sound of lossy compressed files such as MP3 will be
improved. The setting can be separately set to each input
selector. The setting is effective in the signals of 48 kHz or
less. The setting is not effective in the bitstream signals.
•
It cannot be set if the listening mode is Direct or Pure
Direct.
Speakers
:
When surround back speakers and height speakers are
connected, you switch the speakers you want to prioritize
for output. Also, when Speaker B are used, you switch
output between Speaker A/B/A+B.
•
Note that sound is not output from the surround back
speaker during Speaker A+B output.
HDMI Out
:
Allows you to select the HDMI jack to output video signals
from "MAIN", "SUB", and "MAIN+SUB".
DRC
:
Make small sounds easily heard. It is useful when you
need to reduce the volume while watching a movie late
night. You can enjoy the effect only when playing Dolby
series and DTS series input signals.
