Pioneer SC-LX502 Basic Manual Download Page 40

Page: 40 / 100

> Specifications

> Advanced Setup

> Listening Modes

> Network Functions

> Basic Manual

Troubleshooting

Supplementary Information, etc.

About HDMI

■

Compatible functions

HDMI (High Definition Multimedia Interface) is a digital

interface standard for connecting TVs, projectors, Blu-

ray Disc/DVD players, set-top boxes, and other video

components. Until now, several separate video and audio

cables have been required to connect AV components.

With HDMI, a single cable can carry control signals, digital

video and digital audio (2 ch PCM, multichannel digital

audio, and multichannel PCM).

HDMI CEC functionality

By connecting devices and HDMI cables that comply with

the CEC (Consumer Electronics Control) specification of

the HDMI standard, a variety of linked operation become

possible between devices. You can enjoy features such as

linking input switching with the input selector and players,

control volume using the remote controller of the TV, and

automatically switching this unit to standby when the TV is

turned off.

The unit is designed to link with products that comply with

the CEC standard, and that linked operation is not always

guaranteed with all CEC devices. For linked functions

to work properly, do not connect more CEC-compliant

components than the quantities specified below, to the

HDMI jack.

•

Blu-ray Disc/DVD players: up to 3 units.

•

Blu-ray Disc/DVD recorders: up to 3 units.

•

Cable TV tuner, terrestrial digital tuner, and satellite

broadcasting tuner: up to 4 units.

Operation has been confirmed on the following devices:

(As of May 2017)

Toshiba brand televisions; Sharp brand televisions; Toshiba

brand players and recorders; Sharp brand players and

recorders (when used with a Sharp brand television)

ARC

（

Audio Return Channel

）

By connection a TV that supports ARC with a single HDMI

cable, you can not only output the audio and video from

this unit to the TV, but also input the audio from the TV to

this unit.

HDMI Standby Through

Even if this unit is in standby, the input signals from AV

components are transmitted to the TV.

Deep Color

By connecting devices supporting Deep Color, video

signals input from the devices can be reproduced on the

TV with even more colors.

x.v.Color™

This technology realizes even more realistic colors by

broadening the color gamut.

You can transmit 3D video signals from AV components to

the TV.

This unit supports 4K (3840

2160p) and 4K SMPTE

(4096

2160p) video signals.

LipSync

This setting automatically corrects any desynchronization

between the video and audio signals based on data from

the HDMI LipSync compatible TV.

Copyright Protection

The unit supports Revision 1.4 and Revision 2.2 of the

HDCP (High-bandwidth Digital Content Protection), a copy-

protection system for digital video signals. Other devices

connected to the unit must also support HDCP.

■

Supported Audio Formats

2 ch linear PCM

32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,

192 kHz, 16/20/24 bit

Multi-channel linear PCM

Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz,

88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit

Bitstream

Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby

TrueHD, DTS, DTS:X, DTS-HD High Resolution Audio,

DTS-HD Master Audio

DSD

Supported sampling rates: 2.8 MHz
Your Blu-ray Disc/DVD player must also support HDMI

output of the above audio formats.

■

Supported resolutions

HDMI IN1 to IN6

•

Color space (Color Depth):

– 720

480i 60Hz, 720

576i 50Hz, 720

480p

60Hz, 720

576p 50Hz, 1920

1080i 50/60Hz,

1280

720p 24/25/30/50/60Hz, 1680

720p

24/25/30/50/60Hz, 1920

1080p 24/25/30/50/60Hz,

2560

1080p 24/25/30/50/60Hz, 4K (3840

2160p)

24/25/30Hz, 4K SMPTE (4096

2160p) 24/25/30Hz :

RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit)

– 4K (3840

2160p) 50/60Hz, 4K SMPTE (4096

2160p) 50/60Hz : RGB/YCbCr4:4:4 (8 bit),

YCbCr4:2:2 (12 bit), YCbCr4:2:0 (8/10/12 bit)

AUX INPUT HDMI (front)

•

Color space (Color Depth):

– 720

480i 60Hz, 720

576i 50Hz, 720

480p

60Hz, 720

576p 50Hz, 1920

1080i 50/60Hz,

1280

720p 24/25/30/50/60Hz, 1680

720p

24/25/30/50/60Hz, 1920

1080p 24/25/30/50/60Hz,

2560

1080p 24/25/30/50/60Hz : RGB/YCbCr4:4:4

(8/10/12 bit), YCbCr4:2:2 (12 bit)

– 4K (3840

2160p) 24/25/30Hz, 4K SMPTE (4096

2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8 bit),

YCbCr4:2:2 (12 bit)

– 4K (3840

2160p) 50/60Hz, 4K SMPTE (4096

2160p) 50/60Hz : YCbCr4:2:0 (8 bit)

Summary of Contents for SC-LX502





































































































Search results

Summary of Contents for SC-LX502

Reviews:

Related manuals for SC-LX502

Brands by name

Popular brands

Pioneer SC-LX502, Basic Manual

Search results

Summary of Contents for SC-LX502

Reviews:

Related manuals for SC-LX502

Brands by name

Popular brands