Pioneer SC-LX502, Basic Manual

Page: 49 / 100

13
> Specifications > Advanced Setup > Listening Modes > Network Functions > Basic Manual
| Troubleshooting Supplementary Information, etc.
■ Channel Level
Setting Item Default Value Setting Details
Front Left 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Center 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Front Right 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Height Left 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
• The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
Height Right 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
•
The setting cannot be changed if "Zone 2" is set
in "Configuration" - "Zone Speaker" and Zone 2
is on.
Surround Right 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Surr Back Right 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Setting Item Default Value Setting Details
Surr Back Left 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Surround Left 0.0 dB Select a value between " − 12.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
Subwoofer 0.0 dB Select a value between " − 15.0 dB" and " ＋ 12.0
dB" (in 0.5 dB increments). A test tone will be
output each time you change the value. Select the
desired level.
■ Dolby Enabled Speaker
Setting Item Default Value Setting Details
Dolby Enabled
Speaker to
Ceiling
6.0 ft/1.80 m Set the distance between the Dolby Enabled
Speaker and the ceiling. Select between "0.1
ft/0.03 m" to "15.0 ft/4.50 m" (0.1 ft/0.03 m units).
•
The unit of distance (ft/m) shown is the unit
selected for use in "Distance".
Reflex Optimizer Off You can enhance the reflection effect of Dolby
Enabled Speakers from the ceiling.
"Off": When this function is not to be used
"On": When this function is to be used
• The function is not effective if the listening mode
is Pure Direct.
•
This setting can be selected when "Configuration" - "Height Speaker" is set to "Dolby Speaker".