Additional information
12
81
En
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there
is something wrong with this component, check the points below. Sometimes the trouble
may lie in another component. Investigate the other components and electrical appliances
being used. If the trouble cannot be rectified even after exercising the checks listed below,
ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
• If the system does not operate normally due to external effects such as static electricity
disconnect the power plug from the outlet and insert again to return to normal operating
conditions.
General
Problem
Remedy
The power does not turn on. • Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
• Make sure there are no loose strands of speaker wire touching
the rear panel. This could cause the system to shut off
automatically.
No sound is output when a
function is selected.
• If you’re using the line input, make sure the component is
connected correctly (see
Connecting auxiliary components
on
page 79).
• Press
MUTE
on the remote control to turn muting off.
• Adjust the
VOLUME
.
No image is output when
playing discs.
• Make sure the TV is connected correctly (see
Connecting to your
TV
on page 17).
• Reset the video output to interlace (see
About progressive scan
video
on page 68).
No sound from surround or
center speakers.
• Refer to
Setting the channel levels
on page 63 to check the
speaker levels.
• Check that you haven’t selected the
STEREO
sound mode (see
Listening in stereo
on page 39).
• Check that the Virtual
mode is not on (see
Using the Advanced
Surround effects
on page 40).
• Connect the speakers properly (see
Connecting the speakers
on
page 14).
XV-HDT7.book 81 ページ ２００３年５月１２日 月曜日 午後７時５６分
