Surround sound setup
09
64
En
•
L
– Front left speaker
•
C
– Center speaker
•
R
– Front right speaker
•
RS
– Right surround speaker
•
LS
– Left surround speaker
•
SW
– Subwoofer
3
Use the /– button to adjust
the volume to an appropriate level.
4
Use the
/
(cursor up/down)
buttons to adjust the speaker levels in
turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is ± 10 dB.
5
When you’re done, press ENTER to exit
test tone setup.
• The speaker volume can be adjusted
while listening to any sound source you
want by pressing
CH LEVEL
(
SHIFT
+
5
)
and then using the
/
(cursor up/
down) buttons to adjust the channel
levels. After you’re finished with one
channel, use the
/
(cursor left/right)
buttons to move to the next.
• Since the subwoofer produces ultra-low
frequencies its sound may seem quieter
than it actually is.
XV-HDT7.book 64 ページ ２００３年５月１２日 月曜日 午後７時５６分
