6
PD-30-K
1
2
3
4
A
B
C
D
E
F
1
2
3
4
3. BASIC ITEMS FOR SERVICE
3.1 CHECK POINTS AFTER SERVICING
3.2 JIGS LIST
No.
Check points
Procedure
2
Confirm whether the customer complain has been solved.
The customer complain must not be reappeared.
Audio and operations must be normal.
1
Check the firmware version in the test mode.
The firmware version must be the latest one.
If it is not the latest one, be sure to update it.
3
Check the CD playback.
(Track search)
Audio and operations (search etc.) must be normal.
4
Check the SACD playback.
(Track search)
Audio and operations (search etc.) must be normal.
5
Check the playback of the music file of supporting file format
with the USB port of the front.
Audio and operations (search etc.) must be normal.
Items to be checked after servicing
To keep the product quality after servicing, confirm recommended check points shown below.
6
Check the appearance of the product.
N
o scratches or dirt on its appearance after receiving it
for service.
Item to be checked regarding audio
Distortion
N
oise
V
olume too low
V
olume too high
V
olume fluctuating
Sound interrupted
See the table below for the items to be checked regarding audio.
Cleaning
Name
Part No.
Remarks
Cleaning paper
GED-00
8
Cleaning liquied
GEM1004
Refer to "7. DISASSEMBLY".
Position to be cleaned
Pickup lens
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools.
Jigs List
Jig Name
Part No.
Remarks
Service remote control unit
GGF13
8
1
Test mode