30
PD-30-K
1
2
3
4
A
B
C
D
E
F
1
2
3
4
7. DISASSEMBLY
[1] Tray Front
(1)
u
Press the STA
N
DBY/O
N
button to turn on
the
power.
(2) Press the
h
button to open the tray.
(3) Remove the tray front by removing the three
hooks.
(4) Press the
h
button to close the tray.
(5)
u
Press the STA
N
DBY/O
N
button to turn off
the
power.
1 5
3
3
3
3
2
2
4
4
Tray front
Thin minus screwdriver
• Bottom view
Remove the Cabinet top by removing the nine screws.
• How to open the Tray when the power cannot be turned on
MECHA Assy (Bottom view)
Rack loading
Slit
W
hen the Tray cannot be opened because the power cannot be turned on, it can be opened using the thin minus
screwdriver. Insert a thin minus screwdriver in a slit, and slide Rack loading of MECHA Assy in the arrow direction of the
figure. If the Tray pops out a little, fully pull it out by hand.
Tray open
Thin minus screwdriver
Note:
(1) Do
N
OT look directly into the pickup lens. The laser beam may cause eye injury.
(2) Even if the unit shown in the photos and illustrations in this manual may differ from your product, the
procedures described here are common.