Pioneer MCS-333, Operating Instructions Manual

Page: 74 / 576

Advanced settings 74
En
A
dvanc
ed settings
8
Setting Options Explanation
Audio Output
DRC (Dynamic Range
Control) Off Select this to output audio signals without using the DRC function.
On Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Auto
Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc. This only affects Dolby TrueHD signals.
‡7KLVDIIHFWVVXFKDXGLRVLJQDOVDV'ROE\'LJLWDO'ROE\7UXH+'DQG'ROE\'LJLWDO3OXV
‡'HSHQGLQJRQWKHGLVFWKHHIIHFWPD\EHZHDN
Speaker Setup Adjust the Trim (output level) and Delay (distance from viewers) of the speakers.
Please see “Adjust speaker settings” for more details (page 77).
Test Tone Output a test tone from the speakers.
HDMI
Color Space RGB Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
YCbCr Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr 422
Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB Select this to output the video signals as RGB signals. Choose this if the
colors seem too dense and all the dark colors are displayed in a uniform
black.
Resolution
Auto
Select this to choose the resolution of the video signals output from the
HDMI
OUT
terminal automatically.
480I/576I Output the video signals from the
HDMI OUT
terminal with the selected
resolution.
The resolution can be changed by pressing
RESOLUTION
, but Auto cannot be
selected.
480P/576P
720P
1080I
1080P
HDMI Audio Out Bitstream Select this to output HDMI audio signals directly.
PCM
Select this to output HDMI audio signals converted to PCM audio signals.
Reencode :KHQD%'FRQWDLQLQJVHFRQGDU\DXGLRDQGLQWHUDFWLYHDXGLRLVSOD\HGWKH
two audio signals are mixed and converted to DTS audio for output.
Off Select this when you do not want to output the audio signal from the HDMI
output terminal.
HDMI Deep Color 30bits Select this when outputting the video signals with 30-bit color.
36bits Select this when outputting the video signals with 36-bit color.
Off
Select this when outputting the video signals with normal 24-bit color.
:KHQ>ELWV@RU>ELWV@LVVHOHFWHGVHWWKHFRORUVSDFHWRDVHWWLQJRWKHUWKDQ
YCbCr 422
.
HDMI 1080P 24Hz
On
Select this when Resolution is set to
Auto
or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Off Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
HDMI 3D
Auto
:LWK'GLVFVWKHGLVFLVSOD\HGZLWK'LPDJHV
Off 3D images are not played.
3D Notice
Yes
This sets whether or not to display the 3D notice when playing 3D images.
No
HDMI In Audio Through On Specifies the routing of the HDMI audio signal out of this system (amp) or
WKURXJKWRD79:KHQ2QLVVHOHFWHGQRVRXQGLVRXWSXWIURPWKLVV\VWHP
Off: Playback using speakers connected to the unit.
On: Playback through TV connected to the unit via HDMI output
Off
Control
On
Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 35.
Off Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.