83
En
Helpful Information
07
Englis
h
If the information above fails to solve the issue, please contact a Pioneer-authorized service representative. Do
not attempt to service the panel yourself. Opening or removing covers exposes you to possible electrical shock
and other dangers as well as possibly voiding your warranty. Request a qualified service professional to check
your flat panel display.
Some situations that require a service professional are as follows:
• panel dropped or damaged
• power cord or plug damaged
• liquid spilled or an object dropped into the panel
• exposed to rain or water
• noticeable abnormality in panel operation
Occasionally a part within the flat panel display may fail. Verify that your service professional uses only
replacement parts specified by Pioneer or by those with the same characteristics and performance as the original
parts. Use of unauthorized parts can result in fire, electric shock, or other danger. Upon completion of any service
or repair work, request that the service professional perform safety checks to ensure that the product is operating
properly.
If you need more assistance or have a Service/Parts-related question, please contact the Pioneer Service
organization at (800) 421-1625.
Brightness on sides of
screen are uneven
• Display content that completely fills the screen until unevenness is minimized.
• Change the AV mode setting.
IP Control
Issue
Possible Solutions
Web browser screen
does not open after
entering the correct IP
Address
• Confirm that the indicator turns on after setting the
LED
option to On.
• Check the cable connection if the indicator does not light.
• Confirm that the other end of the cable is properly connected to the PC, hub or router if
the indicator does not light.
The indicator lights but
the web browser screen
does not open
• Confirm that the other end of the cable is not connected to any other device than
Ethernet (such as a telephone).
• When using a DHCP, confirm that the IP Address allocated by the server has not
changed (the address may change as a DHCP server reallocates the addresses
periodically).
Entering an IP Address
fails even after activating
the DHCP function
• Confirm that the DHCP server is activated within the network.
No list appears on the
left of the Web control
system screen
• Restart the browser, enter a URL in the address bar then re-open the initial Web control
system screen.
KURO LINK
Issue
Possible Solutions
KRP-600M_500M.book Page 83 Monday, June 16, 2008 10:23 AM
Summary of Contents for Kuro KRP-600M
Page 1: ......
