62
En
06
Use Other Equipment With Your Flat Panel Display
To connect a device for KURO LINK, follow the steps below.
1 ) Turn on the flat panel display and all other equipment.
2 ) Confirm that the panel’s Input Setting for KURO LINK Setting options comply with directions in the
device(s)’ operating instructions.
3 ) Confirm that the other equipment is set for KURO LINK.
4 ) Check that the audio and video are playing back properly from the equipment connected through the HDMI
terminal(s).
5 ) Turn Off the flat panel display.
6 ) Pause for a few seconds before turning the panel back on.
7 ) Verify that all equipment is functioning properly.
To select the device to control via KURO LINK, follow the steps below.
1 ) Access
KURO LINK Setting
through the
Control Setup
menu.
2 ) Select
Input Setting
from the submenu.
3 ) Select the desired Input (INPUT 5 or INPUT 6).
4 ) Press
EXIT
to exit the menu.
If operating an HDMI-supported device using an HDMI port other than the terminal selected in Input Setting, the
system malfunctions. When connecting to an HDMI terminal other than that selected in Input Setting, the
equipment settings should block KURO LINK functions. The KURO LINK menu is not selectable when the option
Input Setting under the KURO LINK Setting menu is set to Off.
The control menu changes to suit the type of HDMI-compatible equipment. When adding, changing, or removing
equipment from KURO LINK, refer to the sections below for installation notes and the supported commands.
6.4.1
Control an AV System
When adding an AV System, connect the unit between the panel and any recorders and/or players. To function
properly, your Audio/Video system manages the KURO LINK functions between the panel and any other
connected equipment.
Power Off Test
Power On Test
Input Setting
:
INPUT 5
Power Off Control
:
Off
Power On Ready
:
Off
Hold Sound Status
:
Off
KURO LINK Setting
KRP-600M_500M.book Page 62 Monday, June 16, 2008 10:23 AM
Summary of Contents for Kuro KRP-600M
Page 1: ......
