51
En
Use Other Equipment With Your Flat Panel Display
06
Englis
h
To delete a learned code, overwrite it with a new code on the same button or follow the directions below.
1 ) Simultaneously press the
EDIT/LEARN
and
2
buttons to begin.
The selected mode indicator flashes when the remote control is ready to be programmed.
2 ) Press and hold
MONITOR
a
for at least two seconds.
The remote control starts deleting all learned codes for selected modes. When completed, the mode
indicator blinks Off and the remote control returns to normal operation.
6.1.2
Assign a Manufacturing Code to the Remote Control
To assign a preset Manufacturing code to the panel’s remote control,
follow the directions below (Manufacturing codes are listed in section
“9.1 Manufacturer Codes to Program into the Remote Control”).
1 ) Press
SELECT
to choose the device to program.
2 ) Simultaneously press the
EDIT
and
1
buttons to begin.
The selected mode indicator flashes when the remote control is
ready to be programmed.
3 ) Use the number buttons to enter a manufacturer code.
When the indicator turns off, the code has been stored in the
remote control.
Factory default manufacture codes:
STB (Set-top Box): Pioneer (0329)
BDP/LD/DVD/DVR: Pioneer (2052)
VCR (VTR): Pioneer (0058)
6.1.3
Issue a Library Search for a Manufacturer Code
If the code for a particular device is unknown, cycle through the available
codes for a similar unit then sample some functions for that code.
To find a code that can control the unit, follow the steps below using
different codes to find the best match.
1 ) Press
SELECT
to choose the device to program.
2 ) Simultaneously press the
EDIT
and
3
buttons to begin.
The selected mode indicator flashes when the remote control is
ready to search the code library.
3 ) Sample a code using a SOURCE POWER, PLAY, 1 or CH+
command.
4 ) Use the up/down arrow (
/
) buttons to advance to the next code
if the sampled code fails to control the device.
Another option is to return to the previous code and repeat Step 3.
5 ) Press
ENTER
to lock in the code that properly operates the device.
All the available buttons for the selected mode are added when the
mode indicator flashes on for one second. The remote control then
returns to normal operation.
EDIT
/LEARN
VCR
STB
MONITOR
BDP
LD
DVD
DVR
CBL
SAT
SELECT
INPUT
SUB
PIP
1
2
3
4
8
7
6
5
MENU
EXIT
USER MENU
RETURN
ON DEMAND
SOURCE
DVD/HDD
VOL
RECEIVER
EDIT
/LEARN
VCR
STB
MONITOR
BDP
LD
DVD
DVR
CBL
SAT
SELECT
FAVORITE
INPUT
TOOLS
TOP MENU
GUIDE
HOME
MENU
ENTER
SUB
PIP
1
2
3
4
8
7
6
5
KRP-600M_500M.book Page 51 Monday, June 16, 2008 10:23 AM
Summary of Contents for Kuro KRP-600M
Page 1: ......
