DVR-RT500-S
99
5
6
7
8
5
6
7
8
C
D
F
A
B
E
1-4: POWER PCB (Refer to Fig. 1-4)
1. Remove the 2 screws
1
.
2. Disconnect the following connector: (CP506).
3. Remove the Fan Motor in the direction of arrow (A).
4. Remove the 3 screws
2
.
5. Disconnect the following connector: (CP1701).
6. Remove the Power PCB in the direction of arrow (B).
1-6: VCR PCB (Refer to Fig. 1-6)
1. Remove the screw
1
.
2. Remove the screw
2
.
3. Remove the 7 screws
3
.
4. Remove the Jack Shield.
5. Remove the VCR PCB in the direction of arrow.
1-5: VCR DECK (Refer to Fig. 1-5)
NOTE:
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
1. Unlock the 2 supports
1
and remove the Top Holder.
2. Remove the screw
2
.
3. Remove the FE Head.
4. Move the Cassette Holder Assy to the back side.
5. Remove the 3 screws
3
.
6. Disconnect the following connectors:
(CP101, CP102, CP3001).
7. Remove the AC Head Cover and VCR Deck in the
direction of arrow.
Fig. 1-4
Fig. 1-6
Fig. 1-5
2
2
1
1 3
3
3
3
3
3
3
1
1
1
3
3
3
2
2
2
Power PCB
Jack Shield
Bottom Plate
VCR PCB
Bottom Plate
AC Head Cover
FE Head
VCR Deck
Top Holder
Fan Motor
(A)
(B)