The Initial Setup menu
147
En
18
HDMI Control
On •
Enables the HDMI Control function. Select this option when
connected to an HDMI Control-compatible Pioneer Flat
Screen TV, AV system (amplifier or AV receiver etc.) or HD AV
converter.
Off
Disables the HDMI Control function. Select this option when
not connected to an HDMI Control-compatible component,
or when connected to a component manufactured by a
company other than Pioneer.
• The KURO LINK function name used on the web and in catalogues is referred to as HDMI Control in the operating
instructions and on the product.
• For more information about HDMI Control, see HDMI Control on page 22.
• This setting is available even if you are not connected to an HDMI device.
• For more information, see Troubleshooting on page 161.
Network
IP Config.
Next Screen
Set
Auto Set IP Address
to
On
. If there is a DHCP (Dynamic
Host Configuration Protocol) server on the local area network
(LAN), this recorder will automatically be allocated an IP
address. If you’re using a broadband router or broadband
modem that has a DHCP server function, select
On
. The IP
address will automatically be determined.
If there is no DHCP server on the network and you select
On
,
this recorder will use its own Auto IP function to determine
the IP address.
Set
Auto DNS Address Get
to
On
. If the DHCP function can
be used with a broadband router or a broadband modem
equipped with a router function, the DNS (Domain Name
System) server address can normally be set automatically.
• If you want to set the IP address manually, Set
Auto Set IP Address
to
Off
then set the IP address, Subnet mask
and Default gateway: Use the
/
buttons to select the address, press
ENTER
, use the
/
buttons to select a
field; use the number buttons to enter a value. Select
Set
, then press
ENTER
.
• The IP address determined by the Auto IP function is 169.254.X.X. The functions for searching for titles in the
Gracenote database on the network and the Connect PC function with an Ethernet connection cannot be used if
the IP address is set for the Auto IP function.
• When inputting the IP address, set within the range shown below. The functions for searching for titles in the
Gracenote database on the network and the Connect PC function with an Ethernet connection cannot be used if
other IP addresses are set.
–
CLASS A: 10.0.0.1 to 10.255.255.254
–
CLASS B: 172.16.0.1 to 172.31.255.254
–
CLASS C: 192.168.0.1 to 192.168.255.254
• When an xDSL modem or terminal adapter is connected directly to the recorder, input the subnet mask indicated
in documents from your provider, etc. Normally input the following values:
–
CLASS A: 255.0.0.0
–
CLASS B: 255.255.0.0
–
CLASS C: 255.255.255.0
• For information on DHCP refer to the network device’s operating instructions.
• You may need to contact your service provider or network administrator when manually entering an IP address.
• If you want to set the DNS address manually, Set
Auto DNS Address Get
to
Off
then set the DNS (Primary) and
DNS (Secondary).
• When
Auto Set IP Address
is set to
Off
,
Auto DNS Address Get
is also set to
Off
.
Setting
Options
Explanation
18 Initial_Settings.fm 147 ページ ２００８年３月７日 金曜日 午前１０時２８分
