Pioneer DVR-710 Command Reference Manual Download

Page: 32 / 59

R11 Series Drive Command Reference Manual Version 1.00

4.5 GET EVENT/STATUS NOTIFICATION Command

The drive supports polling mode only. The Immed bit must be set to one.

Following Notification Classes are supported.

Table 16 - Notification Class Request

Bit Definition

Support

0 Reserved

Operational Change

Request/Notification

yes

2 Power

Management

yes

3 External

Request

4 Media

yes

5 Multi

Host

6 Device

Busy

7 Reserved

4.5.1 Media Events

Following Media Events are supported.

Table 17 – Media Event Format

Code Event

Description

0 NoChg

Media status is unchanged.

1 Eject

Request

The drive has received a request

from the user to eject the

media.

2 NewMedia

The drive has received new

media, and is ready to access it.

3 - 4

Reserved

5 BGformatCompleted

A +RW background format has

completed.

6 BGformatRestarted

A +RW background format has

been automatically restarted by

the drive.

7 - F

Reserved

Page 31

Summary of Contents for DVR-710




























































Search results

Summary of Contents for DVR-710

Reviews:

Related manuals for DVR-710

Brands by name

Popular brands

Pioneer DVR-710, Command Reference Manual

Search results

Summary of Contents for DVR-710

Reviews:

Related manuals for DVR-710

Brands by name

Popular brands