Additional information
17
152
En
HDMI
The picture freezes and
the front panel and
remote control buttons
stop working
• Press
STOP
then try restarting playback.
• Press the front panel
STANDBY/ON
button to switch the power
off, then switch back on and restart playback. If the power fails to
switch off, press and hold
STANDBY/ON
for 5 seconds until the
power switches off.
A device connected via
USB does to function.
DVR-645H-S only
• Check that it is a device that may be connected to this unit (digital
camera, USB memory, memory card reader or printer).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Only the first digital camera, USB memory or memory card reader
connected is readable by this unit. Unplug multiple devices and
connect the device you want to use first.
Problem
Remedy
Problem
Remedy
The connected HDMI or
DVI device does not
display any picture
(and the front panel
HDMI indicator does
not light)
• Try disconnecting then reconnecting the HDMI cable (while the
power of both components is on).
• Try switching the power of the HDMI/DVI device off then back on.
• Try switching off the HDMI/DVI device and this recorder. Next,
switch on the HDMI/DVI device and leave it for around 30 seconds,
then switch on this recorder.
• When you connect an HDMI-compatible device make sure of the
following:
– The connected device’s video input is set correctly for this unit.
– The cable you’re using is fully HDMI-compliant. Using a non-
standard cable may result in no picture being output.
– Don’t use several HDMI cables connected together. Use a single
cable to connect devices together.
• When you connect a DVI-compatible device make sure of the
following:
– The connected device’s video input is set correctly for this unit.
– The DVI terminal on the connected device is HDCP-compatible.
– The connected device is compatible with NTSC (720 x 480i/p, 1280 x
720p, 1920 x 1080i) and PAL (720 x 576i/p, 1280 x 720p, 1920 x 1080i)
video input.
• If the recorder’s internal HDD is damaged or broken, there will be no
HDMI output.
• Not all HDCP-compatible DVI devices will work with this recorder.
DVR645H_WY_EN.book 152 ページ 2006年7月5日 水曜日 午前10時25分