The Initial Setup menu
16
142
En
Angle Indicator
On •
A camera icon appears on-screen during multi-angle
scenes on a DVD-Video disc.
Off
Nothing is indicated on-screen when a multi-angle
scene is showing.
HDMI Output
(only available when an HDMI device is connected)
Screen Resolution
1920 x 1080i
Constant 1920 x 1080i output.
1280 x 720p
Constant 1280 x 720p output.
720 x 576p
Constant 720 x 576p output (for use with the 625
input line system).
720 x 480p
Constant 720 x 480p output (for use with the 525
input line system).
720 x 576i
Constant 720 x 576i output (for use with the 625 input
line system).
720 x 480i
Constant 720 x 480i output (for use with the 525 input
line system).
If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case,
press
(
PLAY
) while holding down the
(
STOP
) button on the front panel to switch the setting (this also
switches Component Video Out
on page 135
to the default setting).
4:3 Video Output
Full
Select if your HDMI TV allows you to change the
aspect ratio.
Normal
Select if your HDMI TV does not allow you to change
the aspect ratio. 4:3 video will be shown with bars on
each side (unless the
Screen Resolution
setting
(above) is set to
720 x 480i
or
720 x 576i
).
Colour
RGB (0–255)
Use if colours are weak and black appears to ‘float’
on the
RGB (16–235)
setting.
RGB (16–235)
Use this setting if colours appear overly rich and the
black too deep on the
RGB (0–255)
setting.
YCbCr 4:2:2
The video signal is output as a 10-bit YCbCr 4:2:2
component signal. This is the standard setting for
HDMI-compatible devices.
YCbCr 4:4:4
The video signal is output as a 8-bit YCbCr 4:4:4
component signal.
• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.
Setting
Options
Explanation
DVR645H_WY_EN.book 142 ページ ２００６年７月５日 水曜日 午前１０時２５分
