The Initial Setup menu
16
145
En
About NTSC on PAL TV
Depending on the Input Line System setting
and the NTSC on PAL TV setting, the signal
format output when the recorder is stopped
varies as shown in the table below.
About the input colour system
The available options of the Input Colour
System setting depend on the Input Line
System setting. The table below shows the
different options available.
Additional information about
component video output
If you switch the Component Video Out
setting to
Progressive
when using a TV that
is not compatible with progressive-scan
video, you will not be able to see anything
displayed on your TV. If this happens, press
and hold the
STOP
button on the front
panel, then press
PLAY
. This will set the
recorder’s video output back to Interlace.
Selecting other languages
for language options
1
Select ‘Other’ from the
language list.
This option appears in the settings for DVD
Menu Language, Audio Language, and
Subtitle Language.
2
Select the language you
want.
• Select by language name: Use the
/
buttons to change the language.
• Select by code number: Press
then
use the number buttons to enter the
four-digit language code.
See
Language code list
on page 157 for a list
of available languages and corresponding
codes.
Input Line
System
NTSC on PAL
TV
Output
when
stopped
625 System
Off
PAL
On
PAL
525 System
Off
NTSC
On
PAL–60
Input Line
System
Built-in tuner
External
input
625 System
Auto
Auto
PAL
PAL
SECAM
SECAM
525 System
n/a
Auto
3.58 NTSC
PAL–60
ENTER
ENTER
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Initial Setup
OSD
Audio Language
Subtitle Language
Auto Language
DVD Menu Language
Subtitle Display
DVD Menu Language
DVD Menu Language
Language
Number
English
0
5
1
4
Language
DVR645H_WY_EN.book 145 ページ ２００６年７月５日 水曜日 午前１０時２５分
