Initial Settings for
DVD player
En
77
Setting remote control code type
When the remote control operation switch is set
to
DVD
, changing the remote control code type
enables you to operate the Pioneer DVD player
by the supplied remote control. There are three
remote codes, code type
A
, code type
B
and
code type
DVH
.
When using this unit with a Multi-DVD Player
(e.g. XDV-P9
II
), select code
A
.
When using this unit with a DVD Navigation
Unit, select code
B
.
When using this unit only, select code
DVH
.
1 Set the remote control selection switch on
the left side of the remote control to the
appropriate position with a pen tip or other
pointed instrument .
• If you select
DVH
mode, there is no need to
take the following procedure.
• If you select
A/B
mode, take the following
procedure and change the code type to the
appropriate type.
2 Pressing
7
and
0
on the remote control
simultaneously changes the code type.
Initially, the code type is set to
A
.
Each time you press
7
and
0
simultaneously on
the remote control the code type changes
between
A
and
B
.
If you forget your code number
Refer to
Changing the Level
, step 3 on page 73,
and press
CLEAR
10 times.
The registered code number is canceled, letting
you register a new one.
English
Español
Deutsch
F
rançais
Italiano
Nederlands
10
Section
