RDS
En
25
Receiving traffic announcements
TA (traffic announcement standby) lets you
receive traffic announcements automatically,
no matter what source you are listening to. TA
can be activated for both a TP station (a station
that broadcasts traffic information) or an
enhanced other network’s TP station (a station
carrying information which cross-references TP
stations).
1 Tune in a
TP
or enhanced other network’s
TP
station.
When you are tuned into a TP or enhanced other
network’s TP station the
TP
indicator (
)
will light.
2 Press
TA
on the head unit to turn traffic
announcement standby on.
Press
TA
until
TA ON
appears in the display. The
tuner will standby for traffic announcements.
• To turn traffic announcement standby off,
press
TA
on the head unit again.
3 Use
VOLUME
to adjust the
TA
volume when
a traffic announcement begins.
Press
VOLUME
to adjust the TA volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announcements.
• Rotating
VOLUME
on the head unit also
adjusts the TA volume.
4 Press
TA
on the head unit while a traffic
announcement is being received to cancel the
announcement.
The tuner returns to the original source but
remains in the standby mode until
TA
on the
head unit is pressed again.
Notes
• You can also turn
TA
on or off in the setting
menu that appears by pressing
F
(
FUNCTION
on the head unit).
• The system switches back to the original
source following traffic announcement recep-
tion.
• Only TP and enhanced other network’s TP
stations are tuned in during seek tuning or
BSM when TA is on.
Responding to the TP alarm
When a TP or enhanced other network’s TP
station is lost due to a weak signal a series of
short beeps, about five seconds long, sound to
remind you to select another TP or enhanced
other network’s TP station.
When listening to the tuner, tune in another
TP
or enhanced other network’s
TP
station
.
• When listening to sources other than the
tuner, this product will automatically seek out a
TP station with the strongest signal after a 10- or
30-second delay. The delay is 10 seconds if TA is
on and 30 seconds if TA and AF are on.
English
Español
Deutsch
F
rançais
Italiano
Nederlands
04
Section