Initial Settings menu
08
48
En
HDMI output with DVD-Audio and SACD sources
(DV-600AV only)
The way audio sources are output from the HDMI terminal depends on the specification of the
connected component.
*
1
This unit checks the specification of the connected component (such sample rate/multi-
channel limitations and compatibility with protected audio contents) and outputs the signal
accordingly. Note that ‘DVD-Audio compatible’ indicates compatibility with protected audio
contents. ‘SACD compatible’ indicates compatibility with DSD signals.
*
2
If
HDMI Out
setting (page 39) is set to
LPCM (2CH)
, DVD-Audio multichannel sources will be
downmixed to stereo. (In cases where the source is downmix-prohibited, only the front left/right
channels are output.) For SACD sources, the 2 channel (stereo) SACD audio area is selected.
If the video output resolution is 480i, 576i, 480p or 576p, audio output may be limited to 2 channel
(depending to the connected component).
*
3
In cases where the source is downmix-prohibited, only the front left/right channels are output.
*
4
If
CPPM
shows in the front panel display, it means it is not possible to output CPPM copycon-
trolled DVD-Audio sources from the HDMI connection. Discs with no CPPM protection are
limited to 2 channel output.
Component specification
Disc Format (DVD-Audio or SACD)
2 ch
DVD-Audio and
5.1 channel compatible on HDMI
*1
DVD-Audio and
2 channel compatible on HDMI
*1
Left/Right or
2 ch downmix
*3
Incompatible with
DVD-Audio on HDMI
*1
2 ch
2 ch
VSX-AX4AVi-s
VSX-AX2AV-s
PDP-506HDE/FDE
PDP-436XDE/FDE
PDP-505XDE/HDE
5.1 ch
No sound
*4
No sound
*4
5.1 ch
*2
Component/output
Example
Component
SACD, DVD-Audio and
5.1 channel compatible on HDMI
*1
2 ch
VSX-2016AV
5.1 ch
*2
No sound
Auto (DSD)
SACD
No sound
No sound
DSD 2ch/5.1 ch
DV600AV_WY_EN.book 48 ページ ２００７年４月２６日 木曜日 午前１１時１３分
