Pioneer DEH-S6000BS Owner'S Manual Download Page 9

Page: 9 / 61

- 9 -

En
g

lis

The microprocessor must be reset in the following situations:

– Before using this unit for the first time after installation

– If the unit fails to operate properly

– When strange or incorrect messages appear on the display

Remove the front panel (page 8).

Press the

RESET

button with a pointed instrument longer than 8 mm.

Remove the insulation sheet before use.

WARNING

•

Do not ingest the battery, Chemical Burn Hazard.

(The remote control supplied with) This product contains a coin/button cell battery. If the coin/

button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to

death.

Keep new and used batteries away from children.

Resetting the microprocessor

Preparing the remote control

RESET

button

How to replace the battery

Insert the CR2025 (3 V) battery with the plus (+) and

minus (–) poles orientated properly.

Summary of Contents for DEH-S6000BS






























































Search results

Summary of Contents for DEH-S6000BS

Reviews:

Related manuals for DEH-S6000BS

Brands by name

Popular brands

Pioneer DEH-S6000BS, Owner'S Manual

Search results

Summary of Contents for DEH-S6000BS

Reviews:

Related manuals for DEH-S6000BS

Brands by name

Popular brands