WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, consult a doc-
tor immediately.
CAUTION
!
Use one
CR2025 (3 V)
lithium battery.
!
Remove the battery if the remote control is not
used for a month or longer.
!
There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the
same or equivalent type.
!
Do not handle the battery with metallic tools.
!
Do not store the battery with metallic objects.
!
If the battery leaks, wipe the remote control
completely clean and install a new battery.
!
When disposing of used batteries, comply
with governmental regulations or environmen-
tal public institutions
’
rules that apply in your
country/area.
Using the remote control
Point the remote control in the direction of the
front panel to operate.
!
The remote control may not function prop-
erly in direct sunlight.
Important
!
Do not store the remote control in high tem-
peratures or direct sunlight.
!
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
FUNCTION
button and
AUDIO
button
You can also select the desired mode by
FUNCTION
button and
AUDIO
button on the
remote control. But operation of
FUNCTION
button and
AUDIO
button on the remote con-
trol differs from the operation of
MULTI-CONTROL
on the head unit. When op-
erating the remote control, switch through the
modes as described below to select the mode.
FUNCTION
button operation
%
Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press
FUNCTION
repeatedly to switch be-
tween the following modes:
Play mode
(repeat play)
—
Random mode
(random play)
—
Scan mode
(scan play)
—
Pause
(pause)
—
Search mode
(search meth-
od)
—
TitleInput "A"
(disc title input)
Note
Refer to
Introduction of advanced built-in CD
player operation
on page 19.
AUDIO
button operation
%
Press AUDIO to select the desired
mode.
Press
AUDIO
repeatedly to switch between
the following modes:
Before You Start
En
9
English
Section
01
