Pioneer DEH-P80RSII, Operation Manual

Page: 17 / 164

2 Press MULTI-CONTROL to turn BSM on.
Searching is displayed. While Searching is
displayed, the six strongest broadcast frequen-
cies will be stored under preset tuning num-
bers
1 to 6 in the order of their signal strength.
When finished, the preset channel list ap-
pears.
#
To cancel the storage process, press
MULTI-CONTROL again.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL up or down.
#
If you do not operate the list within about 30
seconds, the preset channel list mode is can-
celed automatically.
Note
Storing broadcast frequencies with BSM may re-
place broadcast frequencies you have saved
using buttons
1
to
6
.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1 Turn MULTI-CONTROL to switch to the
preset channel list mode.
#
You can also perform this operation by press-
ing joystick on the remote control.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
If you do not operate the list within about 30
seconds, the preset channel list mode is can-
celed automatically.
Notes
!
You can also recall stations assigned to preset
tuning numbers by pushing
MULTI-CONTROL
up or down during the channel display.
!
You can also recall stations assigned to preset
tuning numbers
P01
to
P06
by pressing one of
the preset tuning buttons
1
to
6
on the remote
control.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Use MULTI-CONTROL to select Local in
the function menu.
Local
appears in the display.
2 Press MULTI-CONTROL to turn local
seek tuning on.
Local seek sensitivity (e.g.,
Level 2
) appears in
the display.
#
To turn local seek tuning off, press
MULTI-CONTROL
again.
3 Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM:
Level 1
—
Level 2
—
Level 3
—
Level 4
AM: Level 1
—
Level 2
The Level 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Tuner
En
17
English
Section
04