3
Push MULTI-CONTROL left or right to
select the equalizer band to adjust.
Each time
MULTI-CONTROL
is pushed left or
right, equalizer bands are selected in the fol-
lowing order:
20
—
31.5
—
50
—
80
—
125
—
200
—
315
—
500
—
800
—
1.25k
—
2k
—
3.15k
—
5k
—
8k
—
12.5k
—
20k
(Hz)
4
Push MULTI-CONTROL up or down to
adjust the level of the equalizer band.
Each time
MULTI-CONTROL
is pushed up or
down, the level of the equalization band in-
creases or decreases.
+6
to
–
6
is displayed as the level is increased
or decreased.
#
You can then select another band and adjust
the level.
5
Press BAND to cancel the 16-band gra-
phic equalizer adjustment.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Use MULTI-CONTROL to select LOUD.
LOUD
appears in the display.
2
Press MULTI-CONTROL to turn loudness
on.
#
To turn loudness off, press
MULTI-CONTROL
again.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the FM volume level,
which remains unchanged.
1
Compare the FM volume level with the
level of the source you wish to adjust.
2
Use MULTI-CONTROL to select SLA.
SLA
appears in the display.
3
Push MULTI-CONTROL up or down to
adjust the source volume.
Each time
MULTI-CONTROL
is pushed up or
down, source volume increases or decreases.
SLA +4
to
SLA
–
4
is displayed as the source
volume is increased or decreased.
Notes
!
The AM volume level can also be adjusted
with source level adjustments.
!
The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
!
External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Auto TA and EQ (auto-time
alignment and auto-
equalizing)
The auto-time alignment is automatically ad-
justed for the distance between each speaker
and the listening position.
The auto-equalizer automatically measures
the car interior acoustic characteristics, and
then creates the auto-equalizer curve based
on that information.
Audio Adjustments
En
58
Section
11