2
Press DISPLAY to select the desired
character type.
Press
DISPLAY
repeatedly to switch between
the following character types:
Alphabet (upper case), numbers and symbols
—
Alphabet (lower case)
—
European letters,
such as those with accents (e.g.
á
,
à
,
ä
,
ç
)
—
Numbers and symbols
3
Push MULTI-CONTROL up or down to
select a letter of the alphabet.
Each time
MULTI-CONTROL
is pushed up, al-
phabet, numbers or symbols are displayed in
ascending order (
A B C ...
). Each time
MULTI-CONTROL
is pushed down, letters are
displayed in descending order.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
When the letter you want is displayed, push
MULTI-CONTROL
right to move the cursor to
the next position and then select the next let-
ter. Push
MULTI-CONTROL
left to move back-
wards in the display.
5
Move the cursor to the last position by
pushing MULTI-CONTROL right after enter-
ing the title.
When you push
MULTI-CONTROL
right one
more time, the entered title is stored in mem-
ory.
6
Press BAND to return to the playback
display.
Using the external unit
External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
Basic operations of the external unit are ex-
plained below. Allocated functions are differ-
ent depending on the connected external unit.
For details concerning functions, refer to exter-
nal unit
’
s owner
’
s manual.
Selecting the external unit as
the source
%
Press SOURCE to select External as the
source.
Basic operation
Functions allocated to the following opera-
tions are different depending on the con-
nected external unit. For details concerning
functions, refer to the connected external
unit
’
s owner
’
s manual.
%
Press BAND.
%
Press and hold BAND.
%
Push MULTI-CONTROL left or right.
%
Push and hold MULTI-CONTROL left or
right for about one second and release.
%
Push MULTI-CONTROL up or down.
%
Press any of 1 to 6 on the remote con-
trol.
%
Press and hold any of 1 to 6 on the re-
mote control.
Other Functions
En
68
Section
13
