En
30
4 Switch the DDJ-SZ’s input.
Switch the input selector switches for channels [
CH1
] – [
CH4
] to [
USB
].
5 Select [SETUP] on the Serato DJ software’s screen, then
select [CDJS] at the [Audio] tab in the utility settings.
When using the custom setting
To perform DVS playback with a setting other than those described above, select the
custom setting.
As an example of the custom setting, this section explains the setting method used
to operate [
DECK1
] to [
DECK3
] of the Serato DJ software with a DJ player, and
[
DECK4
] of the Serato DJ software with an analog player.
1 Connect the DJ player that will be controlling [DECK1] to
the [CH1] [CD] terminals, the DJ player that will be controlling
[DECK2] to the [CH2] [CD] terminals.
!
For instructions on connecting, see
Connections
on page 6 .
2 Connect the DJ player that will be controlling [DECK3] to
the [LINE] terminal of [CH3].
!
For instructions on connecting, see
Connections
on page 6 .
3 Connect the analog player that will be controlling [DECK4]
to the [PHONO] terminal of [CH4].
!
For instructions on connecting, see
Connections
on page 6 .
4 Connect the ground wires for the analog player to this
unit’s [SIGNAL GND] terminal.
5 Load the control CDs in the DJ players.
6 Set the control vinyls on the analog players.
7 Switch the DDJ-SZ’s input.
Switch the input selector switches for channels [
CH1
] – [
CH4
] to [
USB
].
8 Select [SETUP] on the Serato DJ software’s screen, then
select [CUSTOM] at the [Audio] tab in the utility settings.
When [
CUSTOM
] is selected, the DDJ-SZ settings utility is displayed.
9 Select the [CONTROLLER OUPUT] tab in the settings utility,
then from the [DDJ-SZ Audio Output] pull-down menu
corresponding to the connected channel, select [CH* Control
Tone CD] for [USB1/2] and [USB3/4] that use a DJ player, select
[CH3 Control Tone LINE] for [USB5/6], and select [CH4 Control
Tone PHONO] for [USB7/8] that uses an analog player.
Checking the control signals
1 Select [SETUP] on the Serato DJ software screen to display
the utilities setting screen.
2 Press the play button on the connected player and play
track 1.
Green ring appears at [
CALIBRATION DECK
].
Check that the innermost ring is close to a true circle.
For details, see the Serato DJ software manual.
The Serato DJ software manual can be downloaded from the Pioneer DJ support site
below.
See [
Software Info
] under [
DDJ-SZ
].
http://pioneerdj.com/support/
