Pioneer CB-A802, Service Manual

Page: 166 / 168

DVD-V8000
166
1 2 3 4
1 2 3 4
C
D
F
A
B
E
9.2 INSTALLATION PROCEDURES
1. Disconnect all cords and cables (including power
cord) attached to the player.
•
To preserve data, be sure that no disc is
loaded in the player.
2. Use the accessory screws to attach the mounting
brackets to the right and left sides of the player,
using the matching screw holes
(see accompanying illustration).
•
When attaching the brackets, first insert the four screws and
hand tighten (so the bracket can be moved slightly by
hand). After confirming that the brackets are mounted in
the proper positions, tighten the screws securely.
Accessory mounting screws
(four for each side)
Rack mount bracket
Player
Mounting holes
inside of player
Precautions during installation
•
The rack mount brackets are identical for right and left sides.
•
During installation, place the player on a flat, level, and
stable table surface. When installing the brackets, raise the
player's side some 10 mm or more above the table surface
to allow easy installation of the brackets.
Attempting to forcibly attach the brackets without raising the
player's sides may result in damage to the player.
•
Use only the mounting screws provided as accessories with
this product. Attempting to use other screws may result in
damage to the player, or the player may fall.
3. After confirming that the screws installed in step
2 are tightened securely, install the player on the
rack.
[Caution]
•
Do not attempt installation before confirming that the rack is
strong enough to sustain the weight of the player and is proper
for the installation location.
•
Screws indicated with a star ( ) in the illustration are not
provided for attaching the rack mount brackets to the rack
itself. Select mounting screws that are appropriate in length
and strength for the weight of the unit, installation conditions,
and the rack specifications. The position of the rack mount
bracket holes are shown in this document's
"
Dimensional Diagram ".
Also, in order to assure safe and secure mounting of the player
in the rack, be sure to place screws in all four holes provided in
each rack mount bracket.
•
Installation to the rack should always be performed
by two or more persons.
•
During installation, take care not to pinch your
fingers or other objects between rack mount
brackets and the rack sides.
4. Confirm that the screws inserted in step 3 are
tightened securely before completing the installation
•
After installation, if the accessory rack mount bracket screws
or the rack mounting screws become loose, vibration caused
by the player's disc rotation or produced by other components
may cause distortion in sound reproduction, as well as leading
to the danger of the player's accidental falling. Be sure to
confirm that all screws are tightened securely.
Player
Rack (EIAcompliant)
Rack mount
installation
screw holes
Rack mount
brackets
Screws ( )
Screws ( )
Installation Procedures
Dimensional Diagram
465.1
482.3
76.2
88
3
116
296.8
elongate hole 6 x 10 (4places)
unit : mm