03
18
En
Chapter 3
Getting Started
Making settings using
the Setup Navigator
menu
Be sure to perform these settings when using the player
in the following situations.
• When you use the player for the first time.
• After
Initial Setup
format.
• After updating the player’s software.
Caution
• Before turning on the power, check that the
connections between the player and other devices are
correct. Also, turn on the power of the devices
connected to the player before turning on the player’s
power.
• When using a Pioneer Flat Screen TV or front
projector compatible with the Control function, set
Control to On on the connected device before turning
on the player’s power.
1
Turn on the TV’s power and switch the input.
See the TV’s operating instructions for the details of
operating the TV.
2
Turn on the player’s power.
Press
STANDBY/ON
.
Check that the
Setup Navigator
menu is displayed.
If the Setup Navigator menu is not
displayed
Press
HOME MENU to display the Home
Menu, select Initial Setup
Setup Navigator
Start, then press ENTER.
3
Start Setup Navigator.
Press
ENTER
.
•
Setup Navigator
starts.
4
Select the OSD language.
Use
/
to select, then press
ENTER
.
When a Pioneer Flat Screen TV that is compatible with
Control function is connected to this player’s
HDMI OUT
terminal, language settings are imported from the
Pioneer Flat Screen TV’s language settings before
Setup
Navigator
begins.
5
Select the appropriate output resolution for the
connected TV.
Use
/
to select, then press
ENTER
.
6
Select the appropriate aspect for the connected
TV.
Use
/
to select, then press
ENTER
.
7
Close the Setup Navigator menu.
Press
ENTER
.
•
Setup Navigator
finishes and the setting is stored.
• Press
RETURN
to go back to the previous
screen.
BDP-3220K_EN_Zhtw.book 18 ページ ２０１２年１１月２８日 水曜日 午前９時４０分
Summary of Contents for BDP-3220K
Page 94: ...09_backcover fm 49 ページ ２０１２年１１月２６日 月曜日 午前１１時２１分 ...
Page 95: ...09_backcover fm 49 ページ ２０１２年１１月２６日 月曜日 午前１１時２１分 ...
Page 96: ......
