07
30
En
Aud
io
O
utput
Digital Output
Bitstream
Select this to output digital audio signals directly.
PCM
Select this to output digital audio signals converted to 2-channel audio
signals.
Reencode
When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Off
Select this to output audio signals other than digital audio signals.
When using the karaoke function, depending on the connection conditions and the disc being played, the sound of the
microphone may not be output. In this case, set the
Digital Output
setting to
PCM
.
Downmix
Stereo
Surround audio signals converted to linear PCM audio signals are converted
into 2-channel (stereo) signals for output.
Lt/Rt
Surround audio signals converted to linear PCM audio signals are converted
into 2-channel signals compatible with Dolby Surround for output (when the
connected AV receiver or amplifier, etc., is compatible with Dolby Pro Logic,
the AV receiver or amplifier outputs the linear PCM audio signals as surround
audio signals).
Downsampling
48k
Outputs audio signals that are limited to a sampling frequency below the set
sampling frequency from the
DIGITAL OUT
terminal. Select according to the
performance of the connected device.
96k
192k
•Sources with sampling frequencies of over 192 kHz cannot be played.
•When playing copyright-protected discs or files, the signals are output with the sampling frequency limited to 48 kHz or below,
regardless of this setting.
DRC (Dynamic Range
Control)
Off
Select this to output audio signals without using the DRC function.
On
Select this to adjust the range between the loudest and softest sounds
(dynamic range) for playback at average volume. Use this when it is hard to
hear dialog or when watching movies at midnight.
Auto
Select to switch the DRC setting On/Off automatically according to the input
audio signal from the disc. This only affects Dolby TrueHD signals.
• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.
• DRC affects audio signals output from the following audio output terminals:
– Analog audio signals output from the
AUDIO OUT
terminals
– Linear PCM audio signals output from the
DIGITAL OUT
or
HDMI OUT
terminals
• Depending on the disc, the effect may be weak.
• The effect may differ depending on the speakers, the AV amplifier settings, etc.
Setting
Options
Explanation
BDP-3220K_EN_Zhtw.book 30 ページ ２０１２年１１月２８日 水曜日 午前９時４０分
Summary of Contents for BDP-3220K
Page 94: ...09_backcover fm 49 ページ ２０１２年１１月２６日 月曜日 午前１１時２１分 ...
Page 95: ...09_backcover fm 49 ページ ２０１２年１１月２６日 月曜日 午前１１時２１分 ...
Page 96: ......
