Pioneer BDP-3220K, Operating Instructions Manual

Page: 42 / 96

08
42
En
• Picture is disturbed during
playback.
• Picture is dark.
• This player supports Rovi analog copy protection technology. With
some TVs (such as with built-in video deck), the picture will not be
displayed properly when the copy protected DVD title is played. This is
not a malfunction.
• If the player and TV are connected via a DVD recorder/video deck,
etc., the picture will not be displayed properly due to analog copy
protection. Connect the player and TV directly.
• Picture is stretched.
• Picture is cropped.
• Aspect ratio cannot be
switched. Is the TV’s aspect ratio
properly set? Read the operating instructions for the TV and set the TV’s aspect ratio
properly.
Is
TV Screen
properly set? Set
TV Screen
properly (page 29).
When video signals with a resolution of 1080/50i, 1080/50p, 720/50p,
1080/24p, 1080/60i, 1080/60p or 720/60p are being output from the
HDMI OUT
terminal, they may be output with an aspect ratio of 16:9
even if
TV Screen
is set to
4:3 Pan&Scan
(page 29).
Picture is interrupted. The picture may be interrupted when the resolution of the recorded
video signal switches. Press
HDMI
to select a setting other than
Auto
(page 31).
The subtitles cannot be
switched. The subtitles cannot be switched for discs recorded on a DVD or BD
recorder.
• No sound is output.
• Sound is not output
properly.
Is the disc played back in
slow motion?
Is the disc played back in fast
forward or fast reverse?
No sound is output during slow motion play and forward and reverse
scanning.
Are the audio cables properly
connected?
• Connect the cable properly according to the connected devices
(page 13).
• Insert the cable firmly and all the way in.
Is the audio cable damaged? If the cable is damaged, replace it with a new one.
Is
Audio Output
properly
set?
Set
Audio Output
properly, according to the connected device
(page 30).
Are the connected
components (AV receiver or
amplifier, etc.) properly set?
Read the operating instructions for the connected components and
check the volume, input, speaker settings, etc.
Is
HDMI Audio Out
properly
set?
Set
HDMI Audio Out
to
Re-encode
or
PCM
. (page 31).
Is a DVI device connected? The sound will not be output from the
HDMI OUT
terminal if a DVI
device is connected. Connect the device to a
DIGITAL OUT
terminal or
the
AUDIO OUT
terminals (page 15).
For some BDs, audio signals are only output from
DIGITAL OUT
terminal or the
HDMI OUT
terminal.
Multi-channel sound is not
output.
Is the audio output of the
connected AV receiver or
amplifier, etc., properly set?
Read the operating instructions for the connected AV receiver or
amplifier and check the audio output settings of the AV receiver or
amplifier.
Is multi-channel sound
selected?
Use the menu screen or
AUDIO
to switch the disc’s sound to multi-
channel.
Noise can be heard when
outputting DTS Digital Audio
signals from the
DIGITAL
OUT
terminal.
Is the connected AV receiver
or amplifier compatible with
DTS Digital Surround?
If an AV receiver or amplifier that is not compatible with DTS Digital
Surround is connected to the
DIGITAL OUT
terminal, set
Digital
Output
to
PCM
(page 30).
192 kHz or 96 kHz digital
audio signals cannot be
output from the
DIGITAL
OUT
terminal.
Copyright-protected audio is converted to 48 kHz or less before output.
Set
96KHz
to
96KHz
or
192KHz
.
Secondary audio or
interactive audio is not
output.
Is
HDMI Audio Out
properly
set?
When listening to the sound from an
HDMI OUT
terminal, set
HDMI
Audio Out
to
PCM
(page 31).
Are
Digital Output
properly
set?
When listening to the sound from an
DIGITAL OUT
terminal, set
Digital Output
to
Re-encode
or
PCM
(page 30).
After a disc is inserted,
Loading
stays displayed and
playback does not start.
Are there too many files
recorded on the disc?
When a disc on which files are recorded is inserted, depending on the
number of files recorded on the disc, loading may take several dozen
minutes.
Problem Check Remedy
BDP-3220K_EN_Zhtw.book 42 ページ ２０１２年１１月２８日 水曜日 午前９時４０分