06
40
Control Function
Problem Check
Remedy
Control function
does not work.
Is the HDMI cable
properly connected?
To use the Control function, connect the Flat Screen TV,
and AV system (AV receiver or ampli
fi
er, etc.) and HD
AV Converter to the HDMI OUT terminal.
Is the HDMI cable you
are using a High Speed
HDMI
®
/
TM
Cable?
Use a High Speed HDMI
®
/
TM
Cable. The Control function
may not work properly if an HDMI cable other than a
High Speed HDMI
®
/
TM
Cable is used.
Is Control with HDMI set
to On on the player?
Set Control with HDMI to On on the player.
Does the connected
device support the
Control function?
• The Control function will not work with devices of other
brands that do not support the Control function, even
when connected using an HDMI cable.
• The Control function will not work if devices that do not
support the Control function are connected between the
Control-compatible device and the player.
• See About connections to components of other makes
supporting the Control function on page13.
• Even when connected to a Pioneer product compatible
with the Control function, some of the functions may not
work. Also refer to the operating instructions of the
connected device.
Problem Check
Remedy
Noise can be heard
when outputting
DTS Digital
Surround signals
from the DIGITAL
OUT terminal.
Is the connected AV
receiver or ampli
fi
er
compatible with DTS
Digital Surround?
If an AV receiver or ampli
fi
er that is not compatible with
DTS Digital Surround is connected to the DIGITAL OUT
terminal, set DTS Digital Surround and HDMI Surround
to PCM.
192 kHz or 96 kHz
digital audio signals
cannot be output
from the DIGITAL
OUT terminal.
• Copyright-protected audio is converted to 48 kHz or
less before output.
• Set Max Sampling Frequency to 96 kHz or 192 kHz.
Secondary audio or
interactive audio is
not output.
Is HDMI Audio properly
set?
When listening to the sound from an HDMI OUT
terminal, set HDMI Audio to Reencode or PCM.
Are Digital Output
properly set?
When listening to the sound from an DIGITAL OUT
terminal, set Digital Output to Reencode or PCM.
After a disc is
inserted, Loading
stays displayed and
playback does not
start.
Are there too many
fi
les
recorded on the disc?
When a disc on which
fi
les are recorded is inserted,
depending on the number of
fi
les recorded on the disc,
loading may take several dozen minutes.
■
is displayed in
fi
le
names, etc.
The characters that cannot be displayed on this player
are displayed in
■
. When you are input characters via
media and peripheral equipment ,etc. The characters
which include simpli
fi
ed character of part or all simpli
fi
ed
character is no true display.
A message
indicating low
memory appears
while playing a
BD-ROM disc.
• Connect a USB device.
• Erase the data stored on the connected USB device
from BUDA Setup.
Summary of Contents for BDP-100- K
Page 90: ...06 46 ...
Page 91: ...06 47 ...