About this unit
NTSC compatibility
This unit is NTSC system compatible. When
connecting other components to this unit, be
sure components are compatible with the
same video system otherwise images will not
be correctly reproduced.
About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this unit
s potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions noted on
this page and in other sections.
Precautions
!
Keep this manual handy as a reference for
operating procedures and precautions.
!
Always keep the volume low enough so
that you can hear sounds from outside the
vehicle.
!
Protect this unit from moisture.
!
If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
!
If this unit does not operate properly, con-
tact your dealer or nearest authorized Pio-
neer Service Station.
To protect the LCD screen
!
Do not allow direct sunlight to fall on the
display when this unit is not being used.
Extended exposure to direct sunlight can
result in LCD screen malfunction due to
the resulting high temperatures.
!
When using a portable phone, keep the an-
tenna of the portable phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes,
etc.
For viewing LCD comfortably
Due to its construction, the view angle of the
LCD screen is limited. The viewing angle (verti-
cal and horizontal) can be increased, however,
by using
BRIGHT
to adjust the black density of
the video. When using for the first time, adjust
the black density in accordance with the view-
ing angle (vertical and horizontal) to adjust for
clear viewing.
DIMMER
can also be used to
adjust the brightness of the LCD screen itself
to suit your personal preference.
Switching the operation mode
This unit features two operation modes: the
SOURCE mode (
S
) and the MASTER mode
(
M
). Switch the mode according to the com-
bined components.
!
SOURCE mode (
S
)
Using with a Pioneer
head unit featuring an IP-BUS input or
multi-channel processor control unit
!
MASTER mode (
M
)
Using with a car
stereo featuring RCA audio inputs or FM re-
ception capability
%
Use a thin standard tip screwdriver to
switch the operation mode switch on the
back of this unit.
!
After switching, reset the micro-
processor.
Before You Start
En
4
Section
02
