Pioneer AVIC-Z620BT Operation Manual Download

Page: 138 / 176

- 138 -

En
g

lis

When Auto EQ is completed, a message is displayed.

NOTE

The measurement time varies depending on the type of vehicle.

TIP

To stop the measurement, touch [Stop].

Store the microphone carefully in the glove box or another safe place.

If the microphone is subjected to direct sunlight for an extended period, high
temperatures may cause distortion, colour change, or malfunction.

You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
[

Standard Mode

]: Front, Rear, Subwoofer.

[

Network Mode

]: High, Mid, Subwoofer.

NOTES

•

Subwoofer settings are available only when [Subwoofer] is [On].

•

Rear speaker settings are available only when [Rear Speaker Output] is [Rear].

Press .

Touch

then .

Touch [Crossover] or [Subwoofer Settings].

Touch

to switch the speaker.

Drag the graph line to set the cutoff position.

Drag the lowest point of the graph to set the cutoff slope.

The following items can also be set.

The menu items vary according to the source.

This setting is available only when [Disc] is selected as the source.

Adjusting the cutoff frequency value

Switches the subwoofer phase between normal and reverse position.

LPF/HPF

Switches the LPF/HPF setting to [On] or [Off]. When it is turned off, the high-pass
filter or low-pass filter of each speaker can also be turned on by touching the
graph lines.

Video settings

[DVD/DivX Setup]

Summary of Contents for AVIC-Z620BT

















































































































































































Search results

Summary of Contents for AVIC-Z620BT

Reviews:

Related manuals for AVIC-Z620BT

Brands by name

Popular brands

Pioneer AVIC-Z620BT, Operation Manual

Search results

Summary of Contents for AVIC-Z620BT

Reviews:

Related manuals for AVIC-Z620BT

Brands by name

Popular brands