Pioneer AVIC-S2 Software Manual Download | Manualshive

Page: 31 / 76

background image

4.3.12

Track Log recording/playback indicator (No. 14)

When a track log is being recorded, a red icon is displayed on the map screens. This
icon also functions as a button leading to the Track Log screen (Page 42) where you
can stop the recording or make the track log visible on the map.

During track log playback a green icon will blink. Tapping this icon (in fact, tapping
the screen anywhere) stops the simulation.

4.3.13

Cursor menu (No. 15)

The Cursor is the selected point on the map (marked by a red dot and radiating red
circles around it), or the current GPS position when it is available and Lock-to-
Position is enabled. When you tap the screen to place the Cursor, the Cursor menu
pops up automatically to give you the list of possible functions you can use the
Cursor for. At the same time Popup Info (street name, house number and the list of
POIs nearby) appears near the selected map point if Popup Info is enabled in the
Quick menu (Page 38).

If you do not use the Cursor menu in a few seconds, it will automatically disappear
back to the bottom of the screen, and Popup Info disappears, too. You can have
them reappear by reopening the Cursor menu using the arrow in the bottom right
corner. When you open the menu manually, it will stay on until you close it or switch
to another screen.

Tip: If you want to see the map around the Cursor, close the Cursor menu and
reopen it. When this menu is opened manually, the map is always moved to have the
cursor in the center.

The content of the Cursor menu is slightly different if there is an active route already
planned. You have the following options:

•

Start:

use the Cursor as the departure point for your route. This menu point is

available only when there is no active route.

•

Route To:

use the Cursor as the destination of your route. This button is to start a

new route. The previous route (if it exists) will be deleted and replaced. If a multi-

31

«
...
29
30
31
32
33
...
»

Summary of Contents for AVIC-S2













































































Reviews:

No comments

Related manuals for AVIC-S2

Brand: Hyundai Pages: 26

Brand: Globe Pages: 4

Brand: Honda Pages: 145

Brand: Scottoiler Pages: 1

Brand: EarthWise Pages: 36

Brand: Seat Pages: 17

Brand: VDO Pages: 31

Brand: VIETA Pages: 101

Brand: Komet Pages: 4

Brand: Komet Pages: 6

Brand: Trust Pages: 6

Brand: Ferrari Pages: 29

Brand: Xomax Pages: 5

prima APBX 8 Ds

Brand: Audison Pages: 21

Brand: Car Solutions Pages: 5

Brand: NORAUTO Pages: 139

Brand: NORAUTO Pages: 153

Brand: Silva Pages: 77

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands