![Pioneer AVH-X8850BT Owner'S Manual Download Page 57](http://html.mh-extra.com/html/pioneer/avh-x8850bt/avh-x8850bt_owners-manual_331410057.webp)
57
OK
G
V
R
L
G
R
V
L
L : Left audio (White)
R : Right audio (Red)
V : Video (Yellow)
G : Ground
Using an HDMI input
4
1
2
3
1
This product
2
HDMI port
3
High Speed HDMI
®
Cable (sold separately)
4
HDMI device (sold separately)
p
When you connect the High Speed HDMI
®
Cable, use the
lock tie to fix it securely.
Refer to
Securing the High Speed HDMI
®
Cable
on page 55
Rear display
1
6
7
8
2
3
4
5
1
This product
2
Yellow (
V OUT
)
3
Rear audio output
4
Mini pin plug cable (sold separately)
5
RCA cables (sold separately)
6
To audio inputs
7
To video input
8
Rear display with RCA input jacks (sold separately)
WARNING
NEVER install the rear display in a location that enables the
driver to watch video images while driving.
This product’s rear video output is for connection of a display
to enable passengers in the rear seats to watch the video
source.
Precautions before installation
CAUTION
Never install this product in places where, or in a manner
that:
Could injure the driver or passengers if the vehicle
stops suddenly.
May interfere with the driver’s operation of the vehi-
cle, such as on the floor in front of the driver’s seat,
or close to the steering wheel or gearstick.
To ensure proper installation, be sure to use the sup-
plied parts in the manner specified. If any parts are
not supplied with this product, use compatible parts
in the manner specified after you have the parts’
compatibility checked by your dealer. If parts other
than supplied or compatible ones are used, they may
damage internal parts of this product or they may
work loose and the product may become detached.
Do not install this product where it may
(i) obstruct the driver’s vision,
(ii) impair the performance of any of the vehicle’s
operating systems or safety features, including
airbags, hazard lamp buttons or
(iii) impair the driver’s ability to safely operate the
vehicle.
Never install this product in front of or next to the
place in the dashboard, door, or pillar from which one
of your vehicle’s airbags would deploy. Please refer
to your vehicle’s owner’s manual for reference to the
deployment area of the frontal airbags.
Before installing
Consult with your nearest dealer if installation requires
drilling holes or other modifications of the vehicle.
Before making a final installation of this product, temporarily
connect the wiring to confirm that the connections are
correct and the system works properly.
Do not install this product in a position where the opening
of the LCD panel is obstructed by any obstacles, such as the
gearstick. Before installing this product, be sure to leave
sufficient space so that the LCD panel does not obstruct the
gearstick when it is fully opened. This may cause interfer-
ence with the gearstick, or a malfunction of the mechanism
of this product.
Installation notes
Do not install this product in places subject to high tempera-
tures or humidity, such as:
Installation
Using an AUX input
1
6
7
9
a
b
8
2
5
3
4
1
This product
2
AUX input
3
Yellow
4
Red, white
5
Mini-jack AV cable (CD-RM10) (sold separately)
6
To Yellow
7
To Red, white
8
RCA cables (sold separately)
9
To video output
a
To audio outputs
b
External video component (sold separately)
p
The appropriate setting is required to use the external video
component.
Refer to
AUX source
on page 35
p
When connecting an external video component using a mini-
jack AV cable, use a separately sold AUX extension cable as
necessary.
CAUTION
Be sure to use a mini-jack AV cable (CD-RM10) (sold
separately) for wiring. If you use other cables, the wiring
position might differ resulting in disturbed images and
sounds.
57
< CRD4941-A >
Connection
Connection
Installation