Pioneer AVH-X1800S, Owner'S Manual

Page: 44 / 216

44
p
This function is not available when adjusting the High
speaker.
Switching the rear speaker
output
p
This function is available when “ Standard Mode ” is selected
as the speaker mode.
The default setting is “ Rear ”.
1 Turn the source off.
 Refer to Selecting a source on page 11
2 Display the “
Audio
” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 44
3 Touch [ Rear Speaker Output ].
4 Touch to switch “
Rear
” or “
Subwoofer
”.
Using BASS Boost
1 Display the “ Audio ” setting screen.

Refer to Displaying the “ Audio ” setting screen on page 44
2 Touch [
BASS Boost
].
3 Touch to select the bass boost level from 0 to
+6 .
Selecting the listening position
You can select a listening position that you want to make as the
center of sound effects.
The default setting is “ Off ”.
1 Display the “
Audio
” setting screen.
 Refer to Displaying the “
Audio
” setting screen on page 44
2 Touch [
Listening Position
].
3 Touch the desired position to change the lis-
tening position.
The following items are available:
Off , Front-L , Front-R , Front , All .
p
“
All
” is not available when “
Network Mode
” is selected as
the speaker mode.
Displaying the “Audio” setting
screen
1 Press .
2 Touch , and then
.
The “ Audio ” setting screen appears.
Using fader/balance adjustment
1 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 44
2 Touch [ Fader/Balance ].
p
Only the balance can be adjusted when “ Network Mode ” is
selected as the speaker mode. Touch [
Balance
] and skip to
step 4.
3 Touch or to adjust the front/rear speaker
balance.
p
Set “ Front ” and “ Rear ” to “ 0 ” when using a dual speaker
system.
4 Touch or to adjust the left/right speaker
balance.
 You can also set the value by dragging the point
on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone application volume when the navigation outputs
the guidance voice.
1 Display the “ Audio ” setting screen.

Refer to Displaying the “ Audio ” setting screen on page 44
2 Touch [
Mute Level
].
3 Touch the item.

ATT (default):
The volume becomes 20 dB lower than the current volume.

Mute :
The volume becomes 0.

Off :
The volume does not change.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p
Settings are based on the FM tuner volume level, which
remains unchanged.
p
This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source.
2 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 44
3 Touch [ Source Level Adjuster ].
4 Touch or to adjust the source volume.
p
If you directly touch the area where the cursor can be moved,
the
SLA
setting will be changed to the value of the touched
point.
p
“
+4
” to “
–4
” is displayed as the source volume is increased
or decreased.
p
The default setting is “
0
”.
Using the auto level control
This function corrects automatically the audio level difference
between the music files or the sources.
1 Display the “
Audio
” setting screen.
 Refer to Displaying the “
Audio
” setting screen on page 44
2 Touch [ Automatic Level Control ].
3 Touch the item.

Off
(default):
Turns the auto level control setting off.

Mode1
:
Corrects a little the audio level difference between the music
files or the sources (for the narrow dynamic range audio
signal).

Mode2
:
Corrects widely the audio level difference between the
music files or the sources (for the wide dynamic range audio
signal).
Adjusting loudness
This function compensates for deficiencies in the low-frequency
and high-frequency ranges at low volume.
The default setting is “
Off
”.
p
This function is not available while you make or receive a call
using the hands-free function.
1 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 44
2 Touch [ Loudness ].
3 Touch the item.
The following items are available:
Off , Low , Mid , High .
Setting the subwoofer output
This product is equipped with a subwoofer output mechanism,
which can be turned on or off.
The default setting is “ On ”.
1 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 44
2 Touch [ Subwoofer ] to switch “ On ” or “ Off ”.
Adjusting the cutoff frequency
value
You can adjust the cutoff frequency value of each speaker.
The following speakers can be adjusted:
Standard Mode : Front, Rear, Subwoofer.
Network Mode : High, Mid, Subwoofer.
p
“ Subwoofer Settings ” is available only when “ Subwoofer ”
is “ On ”.

Refer to Setting the subwoofer output on page 44
1 Display the “
Audio
” setting screen.
 Refer to Displaying the “
Audio
” setting screen on page 44
2 Touch [ Crossover ] or [ Subwoofer Settings ].
3 Touch or to switch the speaker.
4 Drag the graph line to set the cutoff position.
5 Drag the lowest point of the graph to set the
cutoff slope.
p
The following items can also be set.

⁂⁚⁓⁥⁗
:
Switches the subwoofer phase between normal and reverse
position.
 LPF / HPF :
Switches the
LPF
/
HPF
setting to “
On
” or “
Off
”.
When it is turned off, the high-pass filter or low-pass filter of
each speaker can also be turned on by touching the graph
lines.
Audio adjustments
44 < CRD4924-A > < CRD4924-A >
Audio adjustments Audio adjustments