Black plate (70,1)
#
You can also perform the same operation by
pressing
d
(
TRACK
).
Rejecting call waiting
%
Touch
to reject a call waiting.
#
You can also perform the same operation by
pressing
d
(
TRACK
).
Introduction to advanced
operations
1
Touch AV Menu and then touch
Function Menu to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
2
Touch ESC to return to the telephone
standby display.
#
To return to the previous display, touch
Back
.
Connecting a cellular phone
Searching for available cellular phones
1
Touch Phone Connect on the function
menu.
2
Touch Search to search for available cel-
lular phones.
While searching,
Searching
flashes. When
available cellular phones featuring Bluetooth
wireless technology are found, device name or
Name Not Found
(if names cannot be ob-
tained) is displayed.
#
If this unit fails to find any available cellular
phones,
Not Found
is displayed.
#
You can display the BD address by touching
BD ADDR
. To return to the device name, touch
Phone Name
.
3
Touch the device name you want to
connect.
While connecting,
Connecting
flashes. To
complete the connection, check the device
name (
Pioneer BT unit
) and enter the link
code on your cellular phone.
#
Up to five peripheral cellular phones are dis-
played.
#
PIN code is set to
0000
as the default. You
can change this code in the initial setting. Refer
to
Entering PIN code for Bluetooth wireless con-
nection
on page 54.
Using a cellular phone to initiate a
connection
1
Touch Phone Connect on the function
menu.
2
Touch Connection Open.
Connection Waiting
flashes and the unit is
now on standby for connection from a cellular
phone.
3
Use cellular phone to connect to this
unit.
#
To cancel this function, touch
Connection Open
again.
#
PIN code is set to
0000
as the default. You
can change this code in the initial setting. Refer
to
Entering PIN code for Bluetooth wireless con-
nection
on page 54.
Disconnecting a cellular phone
1
Touch Phone Connect on the function
menu.
2
Touch Disconnect to disconnect the cur-
rently connected cellular phone from this
unit.
After disconnection is completed,
No Connection
is displayed.
Registering a connected
cellular phone
1
Touch Phone Register on the function
menu.
Registration assignments for user phone 1, 2
and 3 appear on the display.
2
Touch and hold one of the registration
assignments to register the currently con-
nected phone.
If the registration is succeeded, the device
name of the connected phone is displayed in
the selected assignment.
<
CRB2901-A/N
>70
Available accessories
En
70
Section
19
