Black plate (41,1)
Basic Operations
3
3
3
2
2
2
1
1
1
4
4
4
5
!
You can use this unit to control an iPod by
using a cable (e.g., CD-IU50), which is sold
separately.
!
If an iPod with video capabilities is con-
nected to this unit via interface cable (e.g.
CD-IU200V), which is sold separately, you
can enjoy the video contents of the iPod as
the
iPod
source. In this case, set the
AUX1
to
iPod
. Refer to Switching the auxiliary set-
ting on page 52.
1
Source icon
Shows which source has been selected.
2
Repeat indicator
Shows when repeat range is set to
or
.
3
Song number indicator
Up to 65 535 can be displayed as the song
number.
4
Shuffle indicator
Shows when random play is set to
Songs
or
Albums
.
5
Song information
Shows detailed information of currently
playing song.
1
Touch the source icon and then touch
iPod to select the iPod.
While connected to this unit,
PIONEER
,
Acces-
sory Attached
or
(check mark) is displayed
on the iPod.
#
When the source icon is not displayed, you
can display it by touching the screen.
#
Touch
Hide
to hide the touch panel keys.
#
Before connecting the dock connector of this
unit to the iPod, disconnect the headphones from
the iPod.
#
Depending on the model of iPod or the data
size in the iPod, there may be a delay to start play-
ing after connection.
#
After the iPod has been connected to this
unit, use touch panel keys to select the iPod.
#
When removing the iPod from this unit, this
unit is turned off.
2
To skip back or forward to another
song, touch
o
or
p
.
#
You can also skip back or forward to another
song/video by pressing
c
or
d
(
TRACK
).
3
To perform fast forward or reverse,
keep touching
o
or
p
.
When video is playing, if you keep touching
o
or
p
for five seconds, the icon
m
or
n
is highlighted. When this happens, fast
reverse/fast forward continues even if you re-
lease
o
or
p
. To resume playback at a de-
sired point, touch
f
.
#
You can also perform fast reverse/fast forward
by pressing and holding
c
or
d
(
TRACK
).
4
When playing a file with chapter, touch
o
or
p
to select a chapter.
Notes
!
Read the precautions for iPod in the following
section. Refer to page 97.
!
If an error message or icon is displayed, refer
to
Error messages
on page 89.
!
Connect directly the dock connector cable to
the iPod so that this unit works properly.
!
When the ignition switch is set to ACC or ON,
the iPod
’
s battery is charged while the iPod is
connected to this unit.
!
While the iPod is connected to this unit, the
iPod cannot be turned on or off.
!
The iPod is turned off about two minutes after
the ignition switch is set to OFF.
<
CRB2901-A/N
>41
Using iPod
En
41
Section
12
Using
iPod
