Black plate (80,1)
4
Touch
d
to turn the panorama control
on.
#
To turn the panorama control off, touch
c
.
5
Touch
b
to select Dimension and then
touch
c
or
d
to adjust front/rear speaker
balance.
Each time you touch
c
or
d
it moves the
sound towards the front or the rear.
+3
to
-3
is displayed as the front/rear speaker
balance moves from front to rear.
6
Touch
b
to select Center Width and
then touch
c
or
d
to adjust the center
image.
Each time you touch
c
or
d
it gradually
spreads the center channel sound into the
front left and right speakers over a range
0
to
7
.
3
is the default and it
’
s recommended for
most recordings.
0
places all center sound in
the center speaker.
7
places all center sound
equally in the left/right speakers.
Setting the speaker setting
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to
Large
(large) if
the speaker is capable of reproducing sounds
of about 100 Hz or below. Otherwise select
Small
(small).
!
Low frequency range is not output if the
subwoofer is set to
Off
and the front and
rear speakers set to
Small
or
Off
.
!
It is imperative that non-installed speakers
be set to
Off
.
!
Set the front or rear speaker to
Large
if the
speaker is capable of reproducing bass
content, or if no subwoofer is installed.
1
Touch Speaker Setting.
2
Touch
a
or
b
to select the speaker to
be adjusted.
Each time you touch
a
or
b
selects the speak-
er in the following order:
Front
(front speakers)
—
Center
(center speak-
er)
—
Rear
(rear speakers)
—
Subwoofer
(sub-
woofer)
—
Phase
(subwoofer setting)
#
You can switch to
Phase
only when the sub-
woofer has been set to
On
.
3
Touch
c
or
d
to select the correct size
for the selected speaker.
Each time you touch
c
or
d
selects the size in
the following order:
Off
(off)
—
Small
(small)
—
Large
(large)
#
You cannot select
Off
, when
Front
(front
speakers) have been selected.
#
You can select
On
or
Off
, when
Subwoofer
(subwoofer) has been selected.
#
You can switch
Reverse
(reverse phase) or
Normal
(normal phase), when
Phase
(subwoofer
setting) has been selected.
Correcting the subwoofer
’
s phase
If trying to boost the bass output of the sub-
woofer doesn
’
t do much or rather makes you
feel that the bass gets more murky, this may
indicate that the subwoofer
’
s output and bass
content you hear over other speakers cancel
each other out. To remove this problem, try
changing the phase setting for the subwoofer.
1
Touch Speaker Setting.
2
Touch
a
or
b
to select Subwoofer (sub-
woofer).
Each time you touch
a
or
b
selects the speak-
er in the following order:
Front
(front speakers)
—
Center
(center speak-
er)
—
Rear
(rear speakers)
—
Subwoofer
(sub-
woofer)
—
Phase
(subwoofer setting)
3
Touch
d
to turn subwoofer output on.
#
To turn subwoofer output off, touch
c
.
4
Touch
b
and then touch
c
or
d
to se-
lect the phase of subwoofer output.
Touch
d
to select normal phase and
Normal
appears in the display. Touch
c
to select re-
verse phase and
Reverse
appears in the dis-
play.
<
CRB2901-A/N
>80
Available accessories
En
80
Section
19
