You are noW reaDY to test tHe oPeratIon oF
Your starlIner.
We recommend trying the StarLiner with water before using paint
.
Connect the clean-out hose to the quick connect on the StarLiner. You will
hear an audible click when the hose is connected properly. After connecting,
place the clean-out hose in a bottle filled with water. Turn the switch on the
handle to the “ON” position. The pump should draw the water from the bottle.
Move the StarLiner in a forward direction to check the line width. Turn the
switch to the “OFF” position to stop the flow of water. Water typically sprays
1/3 farther than paint. Adjust your line width accordingly. You can also change
tips to achieve different line widths. Walking speed plays the largest part in
how far you can paint with one box of paint.
When you are ready to use the paint, disconnect the clean-out hose
by pressing the button on the machine side of the hose. The Clean-out
hose should pop off.
Follow the paint preparation instructions on the StarLine paint carton
:
CAuTion: PionEER STARLinE PAinT iS SPECiFiCALLY DESiGnED To
WoRK WiTH THE STARLinER. AnY oTHER PAinT uSED WiTH THiS
MACHinE MAY RESuLT in PooR LinE PERFoRMAnCE, CLoGGinG,
AnD/oR PuMP DAMAGE. THiS MAY VoiD AnY AnD ALL WARRAnTiES
ASSoCiATED WiTH THE STARLinER.
Insert the StarLine paint carton onto the StarLiner plate assembly. The
plastic lip of the paint bag should slide through the plate-slot. This will
hold the bag in place while connecting. Support the box and connect the
StarLiner paint connector with the StarLine paint. You will hear an audible
click when the proper connection is made.
Once secure, lower the StarLine box to the battery cover. You are now
ready to begin striping. We recommend practicing in an off area so
you can get accustomed to the operation of all switches and to select
the tip that best suits your needs.
4
