Handle setup
Loosen the wing nuts located at mid-handle. Remove the lower
wing nuts and bolts from StarLiner frame. Straighten the handle and
tighten the mid-handle wing nuts. Align the lower bolt holes on the
handle and frame. Reattach the bolts and wing nuts.
setup and operation of the side spray box
Located on the side of the StarLiner is a winged bolt. Loosen the bolt
and extend the spray arm. The side spray box will have a winged bolt
and hose attached. Remove the wing nut and align the threaded stud
and alignment pin in the slot of the spray arm. Reattach the wing nut.
To change the line width, raise or lower the spray box.
Caution: Always support the spray box with your hand when adjusting
the height or sliding the spray arm in and out. Failure to do so may
cause damage to the spray box or spray arm
.
2
