Pinion P-Line P1.12, Owner'S Manual

Page: 21 / 36

InstallatIon work
21
19
Î Î
insert cable pulley into cable box.
Î Î
make sure that the marking (11) of the cable pulley is centrally positioned at the apex of the
shifting cables.
•
•
cable pulley is located in the position for 1 st gear.
•
•
right shifting cable (output 2.) projects about 15 cm further out of the cable box ring.
Î Î
make sure that both shifting cables are positioned correctly in the cable pulley guides
(fig. 17)
.
Î Î
keep the shifting cables taut.
11
20
the shifting cables have a tendency to come unspliced on outer sleeve end caps
made from metal.
Î –
use outer sleeve end caps made from plastic (Ø 5.8 mm).
Î
Î
insert the left shifting cable (output 1.) through the shifting cable outer sleeve.
Î
Î
insert the right shifting cable (output 2.) through the shifting cable outer sleeve.
Î
Î
make sure that both shifting cables are positioned correctly in the cable pulley guides (fig. 17) .