Pinion P-Line P1.12, Owner'S Manual

Page: 13 / 36

MaIntenanCe
13
1
in particular in wet conditions or if exposed to road grit. |
2
alternatively 1× each year. |
3
Or after each ride in wet conditions and if exposed to road grit.
after every ride 1 every 250 km every 500 km every 10 000 km 2
Î Î
clean the gearbox with water, detergent and a brush.

Î Î
clean the chain/belt, chain ring and sprocket or belt sprockets as well as, if neces-
sary, the pulleys of the chain tensioner.

3
Î
Î
check the chain or belt tension and correct it if necessary
– see
ChaIn/toothed belt – length & tensIon
, page 29.

Î
Î
Oil the chain lightly.

3
Î Î
check that the chain tensioner pulleys move smoothly and inspect for wear (exces-
sive play, loud running noises) – replace pulleys if necessary
– see
exChangIng Pulleys (PInIon ChaIn tensIoner)
, page 26.

Î Î
check for wear on shifting cables, shifting cable outer sleeves, chain/belt, chain
ring and sprocket or belt sprockets, renew if necessary.

Î Î
check shifting cables for tension and freedom of movement, adjust or renew if
necessary
– see
adjustIng shIftIng
, page 14.

Î Î
Open cable box. thoroughly clean cable pulley, sliding surface and cable box inte-
rior, planetary gears, etc. and grease them liberally – see
(fig. 13) , page 18.

Î Î
check that all screw fasteners – except gearbox housing screws – have the required
tightening torque and adjust if necessary
– see
(fig. 6) , page 12, – see
tIghtenIng torQues
, page 7.

Î Î
perform an oil change
– see
oIl Change
, page 15.
