Pinion P-Line P1.12, Owner'S Manual

Page: 15 / 36

MaIntenanCe
15
1,5 N·m (13 lbf·in) max.
2,5 mm
8
1
2
oIl Change
www.pinion.eu
dispose of used lubricants and oils correctly and in accordance
with the applicable regulations – never dispose of waste in the sewage system or in the ground.
every 10 000 km (6 200 miles) or 1× each year, the oil in your pinion gearbox must be
changed.
use original pinion gearbox oil exclusively. Oil fill volume: 60 ml (2.0 oz).
in the 1
st
oil change of your pinion gearbox, the volume of drained oil will be less than
60 ml (2.0 oz) – nevertheless, comply with the fill volume that we specify!
the pinion oil service-set (p8903) enables you to extract used gearbox oil from the
gearbox quickly and cleanly.
Î Î
unscrew the housing screws (1) of the cable box cover (2) .
Î
Î
remove cable box cover.
3 N·m (27 lbf·in) max.
3 mm
9
3
Î Î
unscrew the screw plug (3) in the filler opening.
Î
Î
have a drainage tray ready.
Î
Î
place bicycle on its side.
Î Î
drain used oil completely from the filler opening into the drainage tray.
Î
Î
place the bicycle upright or replace on repair stand.
Î Î
add fresh oil – oil fill volume: 60 ml (2.0 oz).
Î Î
screw the screw plug (3) into the filler opening and tighten with a tightening torque of 3 n·m
(27 lbf·in).
Î Î
put on cable box cover (2) .
Î Î
tighten housing screws (1) with a tightening torque of 1.5 n·m (13 lbf·in).
Î Î
enter oil change date – see
oIl Change data
, page 35.
•
•
the oil change is complete.