Introduction
8
Remote Control Functions
The REM-3 has three buttons and is used to arm/disarm the alarm system, activate
HOME mode, and send a panic signal.
The remote is a Code-Hopping type (i.e., the code is changed with each
operation and thus prevents “code stealing”) with a key holder for carrying with
ones keys.
REM-3
♦
ARM:
To arm the alarm system, press the GREEN
button on the remote control.
♦
DISARM:
To disarm the alarm system, press the RED
button on the remote control.
♦
HOME MODE:
To activate the alarm system in a Home Mode,
press the BLUE button.
♦
PANIC:
To send a panic signal to the alarm system, press
the BLUE and GREEN buttons together.
PAN-W Wireless Emergency Pendant
The PAN-W code is selected with its internal dipswitch (see Figure 2). Each RC-PRO
can be triggered by several Panic Buttons with the same code.
♦
PANIC:
The PAN-W is used to send a panic
signal to the receiver. This signal triggers
the designated programmed zone.
See the PAN-W manual for more information.
Dipswitch
Figure 2 - PAN-W with Cover Open
