HUNTER-PRO 32 User Manual LED Keypads
4
K
EYPAD
O
VERVIEW
HUNTER-PRO 32 Intruder Alarm System supports two types of LED keypads:
RXN-9 and RXN-416. Both keypads display zone status (i.e., zone open or
closed), system faults, and arming/disarming the system/partition.
RXN-9 can only display the status of the first 9 zones while RXN-416 can only
display the status of the first 16 zones. In any case, zones 17 through 32 can
only be displayed on an LCD keypad.
The keypads use the same bus as other PIMA keypads. Therefore, if is set with
keypad ID, it can be monitored and used with partitions.
RXN-9 has 9 LEDs, RXN-416 has 16 LEDs, as well as more fault indications.
NOTE:
It is possible to purchase from PIMA a keypad with tamper switch that "supervises"
the keypads connected to the system
RXN-416
The RXN-416 keypad has 16 red zone LEDs, a red Fault LED and a green Armed
LED. The 16 zone LEDs are also used for displaying faults (as described below).
Armed Indicator:
The green
ARMED
LED
provides the system arm
status as follows:
OFF:
System/partition is
Disarmed.
ON:
System is in Arm
mode.
Blinking:
System/
partition is in Entry or
Exit Delay Mode.
Fault Notification:
The red
FAULT
LED
blinks when a fault is
detected.
Zone Status:
The status of each
zone is listed above
its number.
Faults:
Long press on the
[
NEXT
] key changes
LED display to system
faults (see Faults
Table for details).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
RXN-416
